ADJUSTING THE AUDIO SETTINGS
5
the left and right speakers.
To adjust the audio settings:
1.Press the MENU button on the remote. The
2.Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu
is displayed.
3.Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/Right Arrow buttons to change
the setting:
•TV Speakers - Turns the
VIZIO
AUDIO
TV Speakers |
|
| On |
|
|
|
|
Surround Sound |
|
| On |
|
|
|
|
Volume Leveling |
|
| On |
|
|
|
|
Balance | - | + | 0 |
|
| ||
|
|
|
|
Lip Sync | - | + | 0 |
|
| ||
|
|
|
|
Digital Audio Out |
|
| PCM |
|
|
|
|
Analog Audio Out |
| Fixed | |
|
|
|
|
Equalizer Settings |
|
|
|
|
|
|
|
Delete Audio Mode |
|
|
|
•Lip Sync - Adjusts the synchronization between the display image and the accompanying audio track.
•Digital Audio Out - Changes the type of processing for HDMI ARC or optical output when connected to a home theater audio system. Select PCM or Bitstream.
You must select Bitstream for audio with more than two channels (3.0, 5.0, or 5.1, for example).
• Analog Audio Out - Sets the volume control properties |
for the RCA (red/white) connectors when connected |
to a home theater audio system. Select Variable to |
control the external device’s volume from the TV’s volume |
controls, or select Fixed to control the external device’s |
volume from your home theater system controls. |
• Equalizer Settings - Adjusts the boost or attenuation |
of different frequencies using either preset or custom |
settings. See Changing the Equalizer Settings on page |
When the TV speakers are set to On, DTS signals cannot be passed through digital audio outputs.
•Surround Sound - Surround sound uses DTS TruSurround™ to deliver an immersive surround sound experience from the TV’s internal speakers. TruSurround completes the entertainment experience by providing deep, rich bass and by delivering crisp details and clear, intelligible dialog. Select On or Off.
•Volume Leveling - Volume leveling uses DTS TruVolume™ to maintain consistent volume levels during transitions between program content, AV formats, and input sources. Select On or Off. In a few cases, volume leveling may artificially suppress volume increases, making it difficult to hear dialog or flattening sudden noises. If this occurs, turn volume leveling off.
•Balance - Adjusts the loudness of the audio output from
33. |
• Delete Audio Mode - Deletes a custom audio mode |
created using the Equalizer Settings. See Deleting the |
Custom Audio Mode on page 33. |
4. When you have finished adjusting the audio settings, press |
the EXIT button on the remote. |
32