E3D320VX / E3D420VX / E3D470VX
Adjusting the Advanced Picture Settings
To adjust the advanced picture settings:
1.From the Picture Settings menu, use the Arrow buttons on the remote to highlight More, then press OK.
2.Use the Arrow buttons on the remote to highlight Advanced Picture, then press OK. The Advanced Picture menu is displayed.
3.Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/Right Arrow to change the setting:
•Noise Reduction - Diminishes artifacts in the image caused by the digitizing of image motion content. Select Off, Low, Medium, or High.
•Color Enhancement - Reduces oversaturation of some colors and improves flesh tones. Select Off,
Normal, Rich Color, Green/Flesh, and Green/Blue.
•Adaptive Luma - Adjusts the average brightness of the picture to compensate for large areas of brightness. Select Off, Low, Medium, Strong, or Extend.
•Film Mode - Optimizes the picture for watching film. Select Auto or Off.
•Backlight Control - Select Off, DCR (Dynamic Contrast Ratio), or OPC.
•Ambient Light Sensor - The ambient light sensor detects the light levels in the room and automatically adjusts the backlight for the best picture. Select On or Off.
4.When you have finished adjusting the Advanced Picture Settings, press the EXIT button on the remote.
5
Resetting the Picture Settings
To reset the picture settings to the factory default settings:
1.From the Picture Settings menu, use the Arrow buttons to highlight More, then press OK.
2.Use the Arrow buttons on the remote to highlight Reset Picture Mode, then press OK. The TV displays, “Are you sure you want to RESET Picture Settings to the factory defaults?”
3.Highlight Yes and press OK.
4.Press the EXIT button on the remote.
17