Using the Network Connection Menu

Using the Network Connection Menu

To connect to a wireless network whose network name (SSID) is not being broadcast:

Your TV is internet-ready, featuring both an Ethernet port and built-in high-speed Wireless-N.

Connecting to a Wireless Network

To connect to a wireless network whose network name (SSID) is being broadcast:

If your TV is connected to a network with an Ethernet cable, you will not see the wireless network connection menu.You must disconnect the Ethernet cable to set up a wireless network connection.

1.	Press the MENU button on the
	remote. The on-screen menu is
	displayed.
2.	Use the Arrow buttons on
	the remote to highlight the
	Network icon and press OK.
	The Network Connection menu
	is displayed.
3.	Highlight Enter Access Point
	Name and press OK.

VIZIO

Enter Access Point Name

Please enter your Access point name.This is used for locating an Access Point with a hidden

SSID

a	b	c	d	e	f	g	h	i
j	k	l	m	n	o	p	q	r
s	t	u	v	w	x	y	z	0
1	2	3	4	5	6	7	8	9

1.Press the MENU button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons on the remote to highlight the Network icon and press OK.The Network Connection menu is displayed.

3.If you do not see your wireless network displayed, highlight Wireless Access Points and press OK. The Wireless Access Points menu, which is a list of available wireless networks, is displayed.

4.Highlight the name of your wireless network (this is the network’s SSID) and press OK.

5.Using the on-screen keyboard, enter your network’s password, then highlight Connect and press OK.

VIZIO
Network connection
Wired Connection	Disconnected
Wireless Access Points
Manual Setup
Enter Access Point Name
Test Connection
Advanced network settings

Highlight Show Keyboard and

press OK to open the on-screen

keyboard.

4. Using the on-screen keyboard,

enter your network’s name

(SSID), then highlight Connect

and press OK.

Highlight Show Keyboard and

press OK to open the on-screen

keyboard.

5. Using the on-screen keyboard,

enter your network’s password,

then highlight Connect and

press OK.

6. Press the EXIT button on the

remote.

.@#	.com Space

Connect

6. Press the EXIT button on the remote.