Vizio M370NV user manual Reset Remote Control to Factory Settings, Satellite Box, Vcr

Programming your Cable or Satellite Set-Top Box

1.Turn on the Cable or Satellite Set-Top Box.

2.Press and release the CABLE button on your VIZIO universal remote control.

3.Press and hold the SET button until the LED flashes twice.

4. Find the programming code for your Cable	DVD Player
or Satellite Set-Top Box and enter it using
	Home Theater
the number buttons. If the code is accepted,
the LED flashes twice after the last digit is	Cable Box
entered. If the LED does not flash twice,
	Satellite Box
repeat Steps 2 through 4 with the next code
listed.	VCR
5. Point the remote control at the Cable or
	Other
Satellite Set-Top Box and press POWER.
The Cable or Satellite Set-Top Box will turn	Other
off. If the Cable or Satellite Set-Top Box
	Other
does not turn off, repeat Steps 2 through 4
with the next code listed for the component
and manufacturer.
Notes:

•If the codes do not work or your brand is not listed, see Searching for Device Codes on page 2.

•Sometimes a code listed will only include limited functions. Try other codes that may include more functionality.

Searching for Device Codes

If you cannot find the manufacturer in the list or the program code does not work, you can use the remote control to search for the correct device code.

1.Turn on the device.

2.Press the matching device button on your VlZIO universal remote control.

3.Press and hold SET until the LED flashes twice.

4.Press 9 9 1. The LED flashes twice.

5.Point the remote control at the device and then press and hold POWER until the device turns off.

Reset Remote Control to Factory Settings

1.Press and hold SET until the LED flashes twice.

2.Press 9 1 9 1 9. The LED flashes twice.

52

www.VlZIO.com