Vizio M471I-A2, M321I-A2, M321IA2, M471IA2 user manual Back of TV

1

BACK OF TV	Installing the TV on a Wall
	To mount your TV on a wall, you will need a wall mount. Consult
	the information below to find the appropriate mount for your TV
	model:
		Installing a TV on a wall requires lifting. To prevent
		injury or damage to the TV, ask someone to help you.

4.Align the Stand with the back of the TV. Use a Phillips screwdriver to insert and tighten the four(4) included

M6 x 18mm Phillips screws into the holes on the back of the TV.

5.When you are finished, place the TV on a stable, level surface.

WALL MOUNT SCREW LOCATION

	M321i-A2	M471i-A2
Screw Size:	M4	M6
Screw Pitch:	0.70mm	1.00mm
Screw Length:	12mm	12mm
Hole Pattern:	100mm (V) x 100mm (H)	400mm (V) x 400mm (H)

Be sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the correct mount for your TV, you can begin the installation.

To install your TV on a wall:

1.Disconnect any cables connected to your TV.

2.Place the TV face-down on a clean, flat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV.

3.Remove the base by loosening and removing the screws.

4.Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount.

Use only with a UL-listed wall mount bracket rated for the weight/load of this TV. See Appendix B - Specifications for the weight of this TV.

For some wall mounts, you may want to use cables with right-angle connectors. This allows the TV to rest closer to the wall.

5