Vizio E322AR, E422AR warranty Installing the Base

Installing the Base

To install the TV stand:

1.Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the TV on a soft surface, such as carpet, rug, or blanket.

2.Align the stand with the TV.

3.Attach the base to the TV by tightening the three (3) pre-installed 14mm screws.

4.Move the TV with attached stand into an upright position and place on a flat, level, and stable surface.

5.To ensure proper ventilation, leave at least 1” of space between the back of the TV and any other objects (walls, etc).

1

Installing the TV on a Wall

To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model:

Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you.

	E322AR	E422AR
Screw Size:	M6	M6
Screw Length:	12mm	12mm
Screw Pitch:	1.0mm	1.0mm
Hole Pattern:	200mm (V) x	300mm (V) x
	200mm (H)	300mm (H)

Be sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the correct mount for your TV, you can begin the installation.

To install your TV on a wall:

1.Disconnect any cables connected to your TV.

2.Place the TV face-down on a clean, flat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV.

3.Remove the base by loosening and removing the screws.

4.Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount.

Use only with a UL-listed wall mount bracket rated for the weight/load of this TV. See Appendix B - Specifications for the weight of this TV.

For some wall mounts, you may want to use cables with right-angle connectors. This allows the TV to rest closer to the wall.

4