Vizio VU32L manual Basic LCD Hdtv Start Up, Connecting the Power Cable, Initial Setup

VIZIO VU32L HDTV10A User Manual

Chapter 3 Setting Up to Watch Television

For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 6.

3.1Basic LCD HDTV Start Up

1.Connecting the Power Cable

Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord into an AC wall socket.

2.Connect Audio and Video Cables to the HDTV (see pages 14 ~ 28 for detailed steps)

3.Turning Power On

Once all the components are connected, press the Power ON button on the side of the HDTV, or press the Power ON (Orange) button on the remote control.

4.Initial Setup

After powering on the TV set, the Initial

Setup screen will come up; please press the button on the remote control.

The Language choice screen will be displayed; the default English option is highlighted. If you wish to change the

OSD language to Español or Français,

press the button on the remote control to select the language you want.

Press the button on the remote to go to the next screen.

Note: At this point, if a Set-Top Box from your Local Cable or Satellite Service Company or other equipment is been used; please press the LAST key on the remote control and skip to Step 5 on page 31. If this is not your case, please continue below.

a.The Tuner screen will be displayed; default choice is

Antenna. If you are using Cable

(No Box) Service, press the button on the remote control to highlight CABLE.

Press the button on the remote to go to the next screen.

Version 3/28/2008	29
	www.VIZIO.com