Vizio M320VT manual Connecting Coaxial RF, Using Your Antenna or Cable for TV

VIZIO M320VT User Manual

Connecting Coaxial (RF)

Using Your Antenna or Digital Cable for DTV

1.Turn off the power to the LCD HDTV.

2.Connect the coaxial (RF) connector from your antenna or digital cable to the DTV/TV CABLE/ANTENNA connector at the rear of the LCD HDTV.

3.Turn on the power to the LCD HDTV.

4.Select TV using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the TV button on the Remote Control.

Note:

•Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or consult your cable, satellite or TV station operator.

•Digital broadcasts are not available in all areas. Refer to www.antennaweb.org for detailed information.

•Make sure the antenna and coaxial cable are correctly grounded.

Using Your Antenna or Cable for TV

1.Turn off the power to the LCD HDTV.

2.Connect the coaxial (RF) connector from your antenna or cable to the DTV/TV CABLE/ANTENNA connector at the rear of the

LCD HDTV

3.Turn on the power to the LCD HDTV.

4.Select TV using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing the TV button on the Remote Control.

Using the Antenna or Cable through your VCR

1.Turn off the power to the LCD HDTV and VCR.

2.Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of your VCR to the DTV/TV CABLE/ANTENNA connector at the rear of the LCD HDTV.

3.Turn on the power to the LCD HDTV and VCR.

4.Select TV using the INPUT button on the remote or side of the LCD HDTV, or directly by pressing

the TV button on the Remote Control.

Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of your VCR.