VIZIO VP422 HDTV10A User Manual
b.The Tuner screen will be displayed; default choice is
Antenna. If you are using Cable
(No Box) Service, press the 
button on the remote control to highlight CABLE.
Press the 
button on the remote to go to the next screen.
c.The Channel Scan screen will be
displayed; default choice is Scan. Press the 
button on the remote control to commence the search for available channels to be stored into memory.
If you do not want to scan for channels at this time, press the LAST key on the remote control.
Note: If you select to skip this step by pressing the LAST key, next time that you decide to complete this procedure; you will need to select the TV as input (through the Input key) and then go through the Menu option to select the Tuner setup to get the option of scanning the channels again.
Version 3/7/2008 | 28 |
| www.VIZIO.com |