VIZIO VU37L HDTV10A User Manual
Chapter 2 Connecting Equipment
2.1 Which Video Connection Should I Use?
The VIZIO VU37L HDTV10A has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays.
Connection Connector Quality (type)
Best
(digital)
Best
(digital)
- - - - - - - - - - - -
Good
(analog)
Best
(analog)
Better
(analog)
Good
(analog)
Rear
Panel
Color
Codes
White
Black
Blue
Green
and
Purple
Yellow,
Orange
and
Red
Description
HDMI
DTV Coaxial RF. When used for MPEG2 encoded bit streams from ATSC broadcast programming, this input takes advantage of the High Definition content.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TV Coaxial RF. This is the connection for standard NTSC TV using antenna or cable.
RGB PC (VGA) – This video input has separate red, green and blue color components. The signal carries horizontal and vertical sync information on the green signal. This is most commonly used for PC input.
Component1/2 - The video signal is separated into three signals, one containing the
Composite (AV1/2) - The complete video signal is carried through this single pin connector. This is the most commonly used video connection.
Note: For more info refer to the Quick Start Guide
Version 3/12/2008 | 14 |
| www.VIZIO.com |