ADJUSTING THE AUDIO SETTINGS
To adjust the audio settings:
1.Press the MENU button on the remote. The
2.Use the Arrow buttons on the remote to highlight Audio and press OK. The Audio Settings menu is displayed.
3.Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/Right Arrow to change the setting:
•Audio Mode - Change the audio mode. This setting is only available when SRS StudioSound HD is set to Standard.
•Balance - Adjusts the loudness of the audio output from the left and right speakers.
•Lip Sync - Adjusts the synchronization between the display image and the accompanying audio track.
•TV Speakers - Turns the
•SRS StudioSound HD - StudioSound HD™ is a
5
•SRS TruVolume - TruVolume® intelligently normalizes volume fluctuations due to television commercials or channel changes. Select On or Off.
•Advanced Audio - See Adjusting the Advanced Audio Settings on page 34.
•Equalizer Settings - Adjust the boost or attenuation of different frequencies. Change the equalizer presets by selecting Flat, Rock, Pop, Classical or Jazz. To customize the equalizer settings yourself, set EQ Mode to Advanced, then adjust each frequency or set EQ Mode to Basic, then adjust Bass and Treble settings. (This setting is only available when SRS StudioSound HD is set to Standard)
•Reset Audio Mode - Restores the audio settings to the factory defaults. See Resetting the Audio Settings on page 34.
4.When you have finished adjusting the audio settings, press the EXIT button on the remote.
33