The remote is not responding.
•Make sure the batteries are properly inserted matching the - and + symbols.
•Replace the batteries with fresh ones.
•Reset the remote: Press and hold the
The TV displays “No Signal.”
•Press the INPUT button on the remote control to select a different input source.
•If you are using cable TV or antenna connected directly to the TV, scan for channels. See Scanning for Channels on page 38.
There is no power.
•Ensure the TV is plugged into a working electrical outlet.
•Ensure the power cable is securely attached to the TV.
•Press the Power/Standby button on the remote or on the back of the TV to turn the TV on.
The power is on, but there is no image on the screen.
•Ensure all cables are securely attached to the TV.
•Ensure all devices are connected correctly. Devices differ; see your device’s user manual for details.
•Adjust Brightness, Contrast, or Backlight. See Adjusting the Picture Settings on page 23.
•Press the INPUT button on the remote to select a different input source.
A
There is no sound.
•Press Volume Up on the remote control.
•Press the MUTE button on the remote to ensure mute is off.
•Check the audio settings. See Adjusting the Audio Settings on page 31.
•Check the audio connections of external devices
•If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.
The sound is flat or dialog is not audible.
•Turn off Volume Leveling. See Adjusting the Audio Settings on page 31.
The colors on the TV don’t look right.
•Adjust the Color and Tint settings in the Picture menu. See Adjusting the Picture Settings on page 23.
•Check all cables to ensure they are securely attached.
The buttons on the remote aren’t working.
•Ensure you are only pressing one button at a time.
•Point the remote directly at the TV when pressing a button.
•Replace the remote batteries with new ones. See Replacing the Batteries on page 10.
68