VIZIO VA19L HDTV10T User’s Manual
Adjusting the TV settings
If you did not set up your HDTV for DTV / TV channels using the Initial Setup screens or if your setup has changed, you can do so from the TV menu.
Press ◄ / ► / ▲ / ▼ to select and adjust options, then press OK when finished making adjustments. Press MENU to return to the previous screen or repeatedly to exit the OSD.
The following options are available in the TV menu:
1.Tuner Mode - Select Cable or Antenna (Air) depending upon the equipment you have connected to the DTV / TV Input.
2.Auto Search - Your HDTV can scan for channels in your area and store the channel information in the channel list. If a channel does not have a signal, your HDTV skips that channel. When you press CH ▲or CH▼, your HDTV changes to the next channel in the channel list.
3.Skip Channel - After your HDTV has stored all of the available DTV channels in memory, you can delete channels from the channel list that you do not want to see. You can still tune to deleted channels using the channel buttons on the remote control.
4.MTS -
5.Time Zone - Setting the correct Time Zone for your area ensures that the correct program times are shown in the Electronic Program Guide.
6.Daylight Saving - Setting the daylight saving time for your area will ensure that the correct program times are shown in the Electronic Program Guide.
Version 9/12/2008 | 34 |
| www.VIZIO.com |