Setting Up the Tuner
You can use the TV’s Tuner menu to:
•Select a Tuner Input
•Perform an Auto Channel Scan
•Perform a Partial Channel Scan
•Manually Add Channels
•Select Channels to Skip
•Select Analog MTS Modes
•Select Digital Languages
VIZIO
Tuner
Tuner Mode | Antenna |
|
|
Auto Channel Scan |
|
|
|
Partial Channel Search |
|
|
|
Add Analog Channel |
|
|
|
Skip Channel |
|
|
|
Analog Audio | Stereo |
|
|
Digital Language | English |
5
Selecting a Tuner Input
Select the type of tuner input you will be using.You can select either Antenna
1.From the Tuner menu, highlight Tuner Mode and press OK. The Tuner Mode menu displays.
2.Highlight Antenna or Cable and press OK. Press EXIT.
Scanning for Channels
Before the TV can detect and display channels and their associated information, you must scan for channels. A channel scan may also be necessary when the TV has been moved to an area where different
To perform an Auto Channel Scan:
1.From the Tuner menu, highlight Auto Channel Scan, and press OK. The channel scan begins.
2.Wait until the channel scan is 100% complete. Highlight Done and press OK.
3.Press the EXIT button on the remote.
If the channel scan is cancelled,the channels that were already discovered are retained. A new channel scan will clear all channels.
VIZIO
CHANNEL SCAN
Channels Found
Digital Channels: 0
Analog Channels: 0
13% Complete
Cancel
Cancel the channel scan.
29