VIZIO VX20L HDTV User Manual
Installation Preparation
Please read this user manual carefully before installing your VIZIO HDTV.
The power consumption of the TV is about 85W, please use the power cord designated for TV. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space between the back of the TV and the wall. If you would like to mount your TV on the wall, please see below ‘Preparing Your LCD HDTV for Wall Mounting’ for additional information. Avoid installing the TV in places with high humidity, dust or smoke so as not to shorten the service life of the electronic components.
Install the TV in landscape orientation; any 90˚ clockwise or
VIZIO offers professional installation services. Please contact VIZIO for more information on these services at
Preparing Your LCD HDTV for Wall Mounting
The VIZIO VX20L can either be kept on the stand base or mounted on the wall for viewing. If you choose to mount the VX20L on the wall, please follow the instructions below for removing the stand base.
To remove the stand base
1.Unplug all of the cables and cords from your VX20L.
2.Place the VX20L face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.
3.Push up the plastic panel on the back of the stand and lift it away once to releases.
4.Remove the four (4) screws that were hidden by the panel, while holding the base.
5.Carefully remove the stand base.
6.The metal bracket remaining will not interfere with the wall mount.
To find the perfect mount for the VIZIO VX20L, browse VIZIO’s certified mount selection at www.vizioce.com or call directly
Version 5/4/2007 | 5 |
| www.VIZIOCE.com |