Vizio E220VA, E190VA user manual Installing the TV on a Wall

Page 10

1

3.Slide the base plate into the slot on the stand until it snaps into place.

4.Move the TV with attached stand into an upright position and place on a flat, level, and stable surface.

5.To ensure proper ventilation, leave 1” of space between the back of the TV and any other objects (walls, etc).

Installing the TV on a Wall

To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model:

 

E190VA

E220VA

E260VA

 

 

 

 

Screw Size:

M4

M4

M4

 

 

 

 

Screw Length:

10mm

10mm

10mm

 

 

 

 

Screw Pitch:

0.7mm

0.7mm

0.7mm

 

 

 

 

Hole Pattern:

75mm x 75mm

75mm x 75mm

100mm x 100mm

 

 

 

 

Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you.

E190VA / E220VA / E260VA

Be sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the correct mount for your TV, you can begin the installation.

To install your TV on a wall:

1.Disconnect any cables connected to your TV.

2.Place the TV face-down on a clean, flat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV.

3.Pull up on the locking clip, then release it. Remove the base by gently sliding it away from the TV.

4.Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount.

Use only with a UL-listed wall mount bracket rated for the weight/ load of this TV. See Appendix A - Specifications for the weight of this TV.

2

Image 10
Contents Razor LED LCD Hdtv Page Thank You for Choosing Vizio When Reading this ManualWelcome My Product InformationImportant Safety Instructions E190VA / E220VA / E260VA DTV Transition Advisory Power LinesTelevision Antenna Connection Protection Lightning ProtectionTable of Contents Troubleshooting & Technical Support Inspecting the Package Contents Installing the TVInstalling the TV Installing the TV on a Wall Left Side Panel Controls and ConnectionsFront Panel Right Side PanelRear Panel Hdmi 1,2 ComponentInput Specific VolumeInput SleepFirst-time setup is complete Press Right ArrowBefore You Begin Connecting Your Devices to the TVConnecting Your Devices DVD Player with DVIBest Hdmi Customizing and Removing Input Names Adjusting the TV SettingsChanging the Input Source Customizing Input NamesChanging the Signal Source Setting Up ChannelsRemoving Unused Inputs from the Input List Customizing the Master Channel List Scanning for New or Additional ChannelsScanning for Channels Customizing Channel NamesSetting the Time Zone Setting the TV’s Date and TimeChanging the On-Screen Menu Language Enabling or Disabling Automatic Date and Time Updates Adjusting the Time for Daylight SavingsSetting the Date and Time Adjusting the TV Settings for Use with a PC Navigating the On-Screen Menu Setting the Sleep TimerViewing a USB Photo Slideshow Customizing the Photo Display Screen Setting the Screen Aspect Ratio StretchAdjusting the Audio Settings Enabling or Disabling SRS TruSurroundHDEnabling or Disabling SRS TruVolume Adjusting the Equalizer SettingsAdjusting Bass and Treble Levels Adjusting the Speaker BalanceSelecting the Digital Output Mode Enabling or Disabling the Built-In SpeakersResetting the Audio Settngs Changing the Audio LanguageAdjusting the Picture Settings Changing the Picture ModeEnabling or Disabling Fast Response Adjusting the Noise Reduction SettingEnabling or Disabling the Ambient Light Sensor Enabling or Disabling Program Ratings Setting the Parental ControlsResetting the Picture Settings Locking and Unlocking ChannelsResetting the Content Locks Blocking and Unblocking Content by RatingChanging the Parental Control Passcode Restarting the Setup App Viewing System Info and Resetting to Factory DefaultsRestoring the TV to the Factory Default Settingss Highlight Start Setup Wizard and press MENU/OKSetting Up Closed Captioning Changing the Appearance of Digital Closed CaptionsPower is on, but there is no image on the screen TV displays No SignalThere is no power PhoneDisplay image does not cover the entire screen When I change input source, the volume changesWhen I change input source, the display image changes size TV has pixels dots that are always dark or always litSpecifications E190VA E220VA E260VA Power Consumption Voltage RangeParts and Labor Type of ServiceZero Bright Pixel Defect Guarantee Limitations and ExclusionsFCC warning Legal & ComplianceFCC Class B Radio Interference Statement Canada CSA Germany VDEPage E190VA / E220VA / E260VA E190VA / E220VA / E260VA Page 110127ST-A
Related manuals
Manual 48 pages 61.09 Kb