VIZIO VW46L FHDTV10A User Manual
4.4 DTV / TV Tuner Setup
When you first used your VW46L FHDTV10A you will have setup your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP menu.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
4.4.1 Tuner Mode
When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE
adjustment page. Press the button to display the TV page.
Press the 
button to highlight the Tuner Mode selection.
Press either the 
or 
button to choose Cable or Air (Antenna) depending upon which equipment you have attached to the DTV / TV Input.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
4.4.2 Auto Search
Press the 
button to highlight the Auto Search selection.
Press the 
button to Auto Search for TV channels available. The TV will automatically search for analog and digital channels.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
4.4.3 Skip Channel
After the TV has stored all of the available DTV channels in memory you will find that some channels will be too weak to watch comfortably or they may be channels you do not want to see. Select the channel
you wish to remove, press the MENU key | . |
Press the 
buttons to open the TV TUNER SETUP menu. Press the 
button to highlight SKIP CHANNEL.
Press the button to select this channel to be skipped when using the CH+ or CH- button. You will still be able to select this channel using the number buttons on the remote control.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
Version 12/7/2007 | 44 |
| www.VIZIO.com |