Vizio D500i-B1 user manual ADD Analog Channel

Adding New Channels

Occasionally, you may need to add a new range of channels or add a new analog channel. You can do this by using the Partial Channel Scan and Add Analog Channel options. This is quicker than scanning all possible channels.

To add a range of new channels:

1.From the TUNER menu, highlight Partial Channel Scan, and press OK. The PARTIAL CHANNEL SCAN menu is displayed.

2.Highlight Scan Mode and select the type of channel you are adding: Analog, Digital, or Analog/Digital.

3.Highlight From Channel and enter the channel where you want to begin the scan. (Use the Left Arrow button to backspace. Use the Number Pad on the remote to enter the channel.)

4.Highlight To Channel and enter the channel where you want to end the scan. (Use the Left Arrow button to backspace. Use the Number Pad on the remote to enter the channel.)

5.Highlight Start and press OK. The partial channel search begins.

6.Wait until the partial channel search is 100% complete. Highlight Done and press OK.

7.Press the EXIT button on the remote.

To add a single new analog channel:

1.From the TUNER menu, highlight Add Analog Channel and press OK. The ADD ANALOG CHANNEL menu is displayed.

2.Highlight Enter Channel # and use the Number Pad on the remote to enter the number of the channel you are adding.

3.Highlight Add Channel and press OK. The TV scans for the channel.

4.When the TV is done scanning for the channel, press the EXIT button on the remote.

5

VIZIO

ADD ANALOG CHANNEL

Enter Channel #

Add Channel

37