Vizio E500i-B1E user manual Arrow buttons on the remote to Highlight More, then press OK

Adjusting the Advanced Picture Settings

To adjust the advanced picture settings:

1. From the Picture menu, use the
	VIZIO
Arrow buttons on the remote to
highlight More, then press OK.		Advanced Picture
2. Use the Arrow buttons on the	Auto Brightness Control		Medium
	Black Detail		Medium
remote to highlight Advanced	Smart Dimming			On
Picture, then press OK.The	Reduce Signal Noise			Low
Advanced Picture menu is
	Reduce Block Noise			Low
displayed.
	Film Mode		Auto
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
• Auto Brightness Control -
The auto brightness control
detects the light levels in
the room and automatically
adjusts the backlight for the
best picture. Select Off, Low,
Medium, or High.

•Black Detail - Adjusts the average brightness of the picture to compensate for large areas of brightness. Select Off, Low, Medium, or High.

•Smart Dimming - Improves the contrast ratio of the screen by adjusting the backlight intelligently. Select On or Off.

•Reduce Signal Noise - Diminishes artifacts in the image caused by the digitizing of image motion content. Select Off, Low, Medium, or High.

•Reduce Block Noise - Reduces pixellation and distortion for mpeg files. Select Off, Low, Medium, or High.

5

•Film Mode - Optimizes the picture for watching film. Select Auto or Off.

4.When you have finished adjusting the Advanced Picture Settings, press the EXIT button on the remote.

Resetting the Picture Settings

To reset the picture settings to the factory default settings:

1.From the Picture menu, use the Arrow buttons to highlight More, then press OK.

2.Use the Arrow buttons on the remote to highlight Reset Picture Mode, then press OK. The TV displays,“Select Reset to restore factory default picture settings”.

3.Highlight Reset and press OK.

4.Press the EXIT button on the remote.

23