Toshiba HD-XE1 manual Connect the player to your TV, Via Hdmi input

Page 21

Chapter2Connections

Step2 Connect the player to your TV.

Via HDMI input

HDMI stands for High Deﬁnition Multimedia Interface. HDMI transfers digital audio and uncompressed digital video on a single cable. As a result, audio cables and video cables don’t need to be connected separately to a device. Use a commercially available authorized HDMI cable.

To HDMI OUTPUT

Introduction Connections

(Basic)	Playback
(Advanced)	Playback

HDMI INPUT

Depending on the equipment connected to this player, such as a TV or a projector, no sound may be output by the display.

In this case, set “Digital Out HDMI” ( page 55) to “PCM”. If sound still is not heard, use analog output.

	HDMI cable (supplied)	Finally connect the supplied
	HDMI cable (supplied)	power cord to a wall outlet.
		power cord to a wall outlet.

HDMI, the HDMI logo and High-Deﬁnition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

connection

Internet

This player supports simultaneous output of video on its HDMI and component video ports. However, some discs may restrict output of video on the component video ports when viewing high deﬁnition content or up-converted DVD content. The resolution on the HDMI output will be the same as the resolution output on the component video output. Thus, because the HDMI output can change automatically to match the maximum available resolution of your display, if you connect both the HDMI output and component output, the resolution on the component output will change if the HDMI output Auto-adjusts.

After completing the connection, proceed to page 23 to make the setting.

Notes

•Refer to the owner’s manual for the TV to be connected to this player for more information concerning HDMI connections.

•When the HDMI connection is not veriﬁed, an error message appears on the front panel display. In this case, disconnect the HDMI cable then connect it again, or turn off the connected HDMI device then turn it on.

•HDMI output is digital only, DVI analog is not supported.

•HDMI is an evolving technology, so it is possible that some devices may not operate properly with this player.

•Be sure to conﬁrm compatibility of a cable when connecting a Deep Color compatible display device.

Others

21

Image 21

Contents XE1 Safety Precautions Following information is only for EU-member states Location of the required labelImportant Safety Instructions Connecting cables or the apparatus Cause serious personal injury and apparatusMalfunction If the apparatus should emit smoke or an Precautions Moisture condensation occurs during the following cases Do not use the unit when moisture condensation may occurFeatures Check that the following accessories are supplied AccessoriesCertain limitations Customer supportTable of Contents Changing picture quality 7Firmware updateAdvanced 7Picture Others 7Audio 7Language 7Ethernet 7GeneralFront panel Index to parts and controlsRear panel Display Disc Returns to the previous screenPreparation of the remote control Open the cover Insert batteriesClose the cover While holding Operating your TV with the remote controlRelease Programming for TV control Icons for function applicability Hint on reading this manual Instructions and actual buttons Icon DiscConnect your player to your A/V system ConnectionsCheck the type of video input on your TV Connecting to a TVVia Hdmi input Connect the player to your TVVia component video input Via S-VIDEO or Video yellow inputConnect either Setting of video output resolution of this player Conﬁgure settings for your displayOutput jacks on Resolution Setting Player Settings and actual output resolutionUp to 480p/576p Up to 720p Up to 1080p 1080i Maximum 480p/576p 720p 1080i No videoVia Hdmi output Connecting to an audio systemVia digital audio output Make the connection as below, and set Digital Out HdmiMake the connection as below, and set Speaker Setting Via 5.1ch analog audio outputAnalog audio input Playback Basic Pre-recorded discs Disc compatibilityRecordable discs you can play on this player Disc SpeciﬁcationOn cleaning discs On handling discsOn storing discs Press Front panel or Remote control Powering on/Loading a discPress Press ON/STANDBYPlaying a disc Stopping playback / Pausing playbackTo display a If playback does not startTitle you want Using A/B/C/D buttonsPress / / / to select the item you want Playing from the top menuDuring playback, press Selecting the sound of a disc recorded in DVD VR modeOn the TV screen Selecting the soundDisplayed on the TV screen During playbackPress while playing a scene recorded with multiple angles Selecting subtitlesPlaying at various speeds Skipping chapters or tracksDuring playback Locating by entering a section number Press the number buttons toLocating by entering elapsed time You can resume playback from the location lastChanging picture quality When complete, pressPress To select Edit of 1, 2 or Then press PressSelecting picture quality At page 37, select the number 1 Or 3, then pressPlayback picture reﬂ ects the selected picture quality Playback Advanced Repeat playback Press To select the repeat modeYou can repeat a desired section Repeat modes are listedPlaying Use the eight direction buttons To move the cursor Press While a disc with Support for cursor use isExtension ports may be used Future for additional control optionsSubtitle setting shows a language code You can conﬁrm operational status and setting detailsInternet connection Before using Connection requirementEx. Special HD DVD site Movie trailer Basic Playback Back view of the player Connection5th Mac Address User information settingSelect your network speed Select whether you wish to accept cookies or notInsert the HD DVD disc and close the tray Select an item from the menuPreparation Page Others Press To select the setting item, then Customizing the function settingsDuring stop, press From 54, to change the selection by / orProgressive TV Picture Bitstream AudioDownmixed PCM OffCrossover Setting When you selected 5.1ch1ch 2chLanguage Ethernet Set the details GeneralSelect On or Off by pressing / buttons. On Select the desired limitation level by pressing / buttonsTurns off the beep sound Update Firmware update InitializePersistent Storage Language code list PCM Output sound conversion tableGNU General Public License Version 2, June H i b i t aBasic Playback No Warranty GNU Lesser General Public License Version 2.1, February H i b i t BOthers No Warranty H i b i t D H i b i t CNo picture Remote control does notNo sound Playback picture has noiseSpeciﬁcation Memo Memo Memo This is only for U.K. customers Toshiba Customer Helpline on