Toshiba SD5700 manual Pcm

Page 55

Audio

Aud;o OutSelect Bitstream

DynamicRangeControlOn

KaraokeVo_al Off

CDAttenuation Off

Make this selection only when you use your audio equipment (e.g. receiver) connecting to the DVD player via the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack.

According to performance of your connected receiver, select a sound processing option for playback of a disc that contains high frequency signals (sampling frequency 96 kHz or 88.2kHz).

On: Select when your connected receiver does not conform to high frequency signals of 88.2kHz or higher.

The DVD player outputs these signals in a disc

depressing the frequencies to 48 kHz or 44.1 kHz.

Off: Select when your connected receiver conforms to high frequency signals of 88.2kHz or higher. The DVD player outputs these signals in a disc as they are.

Notes

•Regardless of this setting, the DVD player outputs high frequency signals in a copyright protected disc, depressing to 48 kHz or 44.1 kHz; and outputs those of 176.4 kHz or 192 kHz in a disc with no copyright protection, depressing to 88.2 kHz or 96 kHz.

•If you select "Off" while your connected receiver does not conform to high frequency signals of 88.2kHz or higher, you cannot hear output sound of those signals.

Select the output sound format corresponding to your system connection.

For details of sound recording systems, see [_.

Bitstream:

Select when

connected

to an amplifier

 

equipped with a Dolby Digital, DTS,

 

MPEG1 or MPEG2 decoder. [_[_

 

The DVD player outputs digital audio

 

information in the bitstream format

 

when you play a DVD video disc

 

recorded on the Dolby Digital, DTS,

 

MPEG1 or MPEG2 recording system.

Analog 6ch:

Select when

connected

to an AV

 

amplifier equipped with 5.1ch audio

 

inputs. [_

 

 

 

The next screen will detail the

 

appropriate

settings.

"rl

PCM:

Select when

connected

to a 2 channel

digital stereo amplifier. [_

The DVD player outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1 or MPEG2 recording system.

Note

When you make a connection to a TV, or Dolby Pro

Logic or stereo system via the analog audio jacks, select "Bitstream" or "PCM."

(Continued)

Page 54 Page 56
Image 55
Page 54 Page 56
Contents SD.5700 Accompanying Appliance Exclamation point within an equilateral triangle isLocation of the required label Important Safety Instructions Page Important Safety Instructions Page Moisture condensation occurs during the following cases Cleaning¸On Discs IOn handling discs Structure Disc ContentsDiscs Audio SizeVideo MovingContents Power cord Power indicator OPEN/CLOSE button DVD Audio indicatorSee the page in for details DVD display Indicator Multifunctional indicator indicates OperatingMenu button ButtonButton Lift to open the cover RemotecontrolClose the cover Loading batteries 0perating with the remote controlPage Supplied To S Video OUT YellowTo video input yellowl Interlaced outputs/inputs ColorStream Set to Set to PProgressive outputs/inputs ColorStreamePro Page Be sure to set Audio Out Select Dolby DigitalMPEG2 sound Digital Theater Systems DTSSurround Audio OUT To5.1chaudioPage I4 ress OPEN/CLOSE to close the disc tray Press the power button PowerPress OPEN/CLOSE Place a disc on the disc trayPAUSE/STEP To resume normal playback, press Play button Disc REV FWD REV Fast reverse playback Press REV or FWD during playbackPress PAUSE/STEP during still playback To resume normal playback Press PlayEach time you press the Slow Press Slow during playbackPress Play DVD player effaces the memoryTopmenu The top menu appears on the TV Screen Press TOP MenuSelect the title you want moving the cursor control Press EnterRepeat steps 2 and 3 if necessary Press Play or Enter PressTPage Press the number buttons to enter the time Press T several timesPress A-B RPT again at the end of the segment point B Press RepeatTo resume normal playback Press Clear To resume normal playback from memory playback Press Clear Insert a disc and press Memory duringStop Press Play while the display appears on the TV screenTo resume normal playback Press Clear Press RandomControl to select Zoom on Move the cursor controlPress the Zoom button RepeatedlyPress Enter Sound enhancement menu Appears Cting the Sound Enhancement E.A.MPress E.A.M To exit the audio enhancement SelectionTo turn off the angle number display Press Clear Camera AngleTo turn subtitles on or off DisplayedSelecting sound channels of Video CDs Audio The current audio setting isPress Audio during playback Selecting audio streams of DVD audio discsDVD Page To turn off the Virtual Remote Press V-REMOTE Ing the Graphic Remote Control V-REMOTEDuring playback, press V-REMOTE Move the cursor control to select the icon, and press EnterMove the cursor control a / v to select a desired item Move the cursor control a / v to change the settingCting the Playback Function Quick During playback, press QuickTo exit the Navi menu Press Navi Cessing Features NaviMove the cursor control to select a desired feature icon Press NaviNavi menu selections Preview 1toAngle Viewer CaptureTo select the camera angle To quit the on-screen display To enhance picture edges To quit the on-screen display, press Enter Move the cursor control a / T to selectPage To return to the previous display Press Return Stomizing the Function Settings Press Setup during stop To selectanotheroperation,go backto step Press SetupTo use the menu screen when playing a PBC Setting Details TV Shape43 format. Only when connected to a Announcing when each remote commandIiiiiiiiii PCM CCenter Speaker Adjusting the delay timeCenter Channel Delay Surround Channel DelayPHO ASpanlsh Page To change the parental lock level Follow steps 1 To change your 4-digit security codeVideo CD English Croatian No alternate Guarani Language GujaratiChinese Hausa Dutch HindiPage DVD player turned off by itself Calling Service PersonnelNtsc Your Responsibility Limited Ninety 90 Day WarrantyLimited One 1 Year Warranty Rental UnitsCanada contact How to Obtain Warranty ServiceToshiba
Top Page Image Contents