Toshiba SD-V296 manual Auto Repeat, Recording & One-touch Timer Recording OTR

Auto Repeat

The unit will automatically rewind the cassette tape when it has reached the end and will automatically start playback unless you press [STOP C] or you turn off the unit.

VCR

1 Press [SETUP], and choose “AUTO REPEAT”.	TIMER PROGRAMMING	2 Press [B] to “AUTO REPEAT” to set “ON” or “OFF”.
	- M E N U -
	SATELLITE LINK
	B AUTO REPEAT [OFF]
SETUP	CLOCK SET
	LANGUAGE SELECT

or

Press [SETUP] to exit.

- M E N U -

TIMER PROGRAMMING SATELLITE LINK

B AUTO REPEAT [ON] CLOCK SET LANGUAGE SELECT

Note:

•The auto repeat function can also be set “ON” or “OFF” by pressing [REPEAT] on the remote control.

•To cancel auto repeat function, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [SETUP] to exit.

•The auto repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.

Recording

This unit has no tuner system so it cannot receive TV broadcasts without external tuner or such devices.

Note:

• You can also set to external tuner. Refer to “Satellite Link” on page 16. TV this unit external tuner

Recording & One-touch Timer Recording (OTR)

VCR

1	Insert a recordable	2	Press [INPUT SELECT] until “L1” or
	cassette tape.		“L2” is displayed on the TV screen.
			Select “L1” to activate rear input jacks.
			Select “L2” to activate front input jacks.
			INPUT
			SELECT
			See note on the right.

3Press [SPEED] to select the desired tape speed.

SPEED	Tape speed	Recording / playback time
	Type of tape	T60	T120	T160
	SP mode	1hour	2hours	2-2/3hours
SP	SLP mode	3hours	6hours	8hours

4Press [REC/OTR] until desired recording time is selected.

REC/OTR
REC	OTR (0:30)		OTR (1:00)
(normal recording)
REC	OTR (8:00)	OTR (7:30)

5 Press [STOP C] to	6 Press [OPEN/CLOSE A] to eject the
stop recording.	recorded cassette tape.
	OPEN/CLOSE
STOP

6

3

2

1	5	6	4	5
				4

To stop recording temporarily (pause mode)

Press [PAUSE F].

•During the recording in pause mode, 5 C marks appear on the TV screen. Each C mark represents 1 minute.

•Press it again to resume recording.

•Pause mode will be automatically canceled after 5 minutes to prevent damage to the cassette tape and the video head.

Note:

•Do not change the external tuner’s channel while you are recording. You CANNOT watch one channel and record another at the same time.

•Connect your external tuner to the L1 (rear panel) jacks of the unit. Connect camcorders and other such devices to the L2 (front panel) jacks. Refer to page 11.

Accidental Erasure Prevention

To prevent accidental recording, remove erase- protection tab of the cassette tape. To record on it later, cover the hole with adhesive tape.

erase-protection tab

Timer Recording

VCR	• Insert a recordable cassette tape.
	• Make sure to turn on the external
	tuner.
1 Press [SETUP]. Select “TIMER PROGRAMMING”.
	- M E N U -	TIMER PROGRAMMING
SETUP	B TIMER PROGRAMMING	PROG	12345678
	SATELLITE LINK	DATE
	AUTO REPEAT [OFF]
		START	TIME
	CLOCK SET
	LANGUAGE SELECT	END	TIME

L1/L2

REC SPEED

Available program number flashes.

2Select an empty program number. Then press [B] to go to next step.

or

PROGRAM NUMBER 1
DATE		– – / – –
START	TIME	– – : – –	– –
END	TIME	– – : – –	– –
L1/L2		– –
REC	SPEED	– –

– 14 – EN

E8EB5UD_SD-V296KU_EN_ES_v1.indd 14

2008/07/14 10:37:13