Timer recording, Stereo recording and playback

Timer recording

Timer recording can be programmed

Preparation

5 Press ENTER to accept them.

In case of Timer programs-overlapping

on the TV-screen with the remote con-

• Turn ON the TV and set to the AV input mode.

To enter other pro-

Do not overlap timer programs as portions of the

trol. The built-in timer allows automatic

• Press VCR to select the VCR mode. (The VCR indicator will light.)

23 MON

13:00

14:30

conflicting programs will be lost. The first recording

unattended recording of up to 8 pro-

• Load a video cassette with the erase prevention tab intact. Make

grams, repeat steps

------

--:--

time has priority over the next recording time as

2 through 5.

------

--:--

grams within 1 month.

sure with CALL that the time and date are correct.(see page 26).

------

--:--

shown in the diagram below.

------

--:--

• To return to the

------

--:--

If you set up many timer recording programs at the

------

--:--

Example: Timer recording for channel 1, 13:00 to 14:30 with Tape

normal screen,

------

--:--

same start time, the priority will be the top program in

speed LP on timer program number 1.

press VCR MENU

SELECT :

/ ENTER

the timer recording list.

twice.

EXIT : MENU

8 : 00

9 : 00

10 : 00

11 : 00

Press VCR MENU. Press

6 Press TIMER REC. The clock symbol ( ) will

Program 1

to select TIMER REC SET.

Program 2

Then press ENTER.

appear on the display and the DVD/VCR stands by

Deleted Parts

for recording. At the same time, VCR mode will

Program 3

change to DVD mode automatically. You can use

Recording

Non Recorded Portion Parts

Prog.1

Prog.2

Prog.3

DVD even if the VCR is in the Timer recording mode.

Control Settings

If you do not use the DVD, turn the power off.

• If the clock symbol (

) blinks on the display in

Notes:

2 Each line stands for one pro-

spite of the pressing of TIMER REC, the cassette

• The daily/weekly recording can be made continuously

------

--:--

may not have been loaded yet. (see page 19)

until the recording is cancelled or the tape reaches the

gram of the 8 memories. Select

------

--:--

• If the cassette is ejected in spite of the pressing

end.

one line with

or . Then

------

--:--

------

--:--

of TIMER REC, the erase prevention tab of the

• During timer recording, the automatic rewinding mecha-

press ENTER.

------

--:--

------

--:--

cassette may have been removed. (see page 19)

nism does not function.

------

--:--

------

--:--

Notes:

Confirmation / Cancellation of the Timer

SELECT : / ENTER

EXIT : MENU

• In case of the timer recording from the scart socket,

Recording

proceed as follows: In step 4, press

repeatedly

Set the desired date with

until the "CH" line blinks. Then press

repeat-

. Then press

to accept it.

edly until “AV1” or “AV2” or “AV3” appears.

• If the clock symbol ( ) blinks when the timer recording

If the Timer has been activated, press TIMER REC

ended, the TV program has not been completely

1 to deactivate the Timer. The clock symbol (

) will

recorded because of an insufficient tape supply. Press

disappear. Then press VCR to change to VCR

TIMER REC to cancel the timer program or press

mode.

EJECT on the DVD/VCR to remove the cassette tape.

2 Press PROGRAM. All the 8 Timer memories will

• During timer recording standby mode, the VCR mode

Set the Starting time (13:00),

cannot be selected. To use the VCR, press TIMER

appear.

4 ending time (14:30), channel

REC at first, then press VCR to change to VCR mode.

(1) and Tape speed (LP) in the

Press TIMER REC again to set the VCR into timer

Notes:

same way as the step 3.

recording standby mode.

• In the event of a power failure, the data

• In case of an erroneous

Timer Recording Special Case

of the automatic recording will be main-

Weekly (e.g. WKL-TUE: each Tuesday) or daily (e.g.

input, press

to go back to

tained in the built-in memory for about

previous step and enter

MON-SAT: Monday to Saturday) Timer recording

30 minutes. Also, the clock will continue

again.

Follow the procedure for timer recording on page 28. At

3 To cancel Timer program: Press

to run for this period of time. Thereafter

to select

picture 3, press

repeatedly until the desired

the data will be deleted. When the

power resumes, the time display will

To record with the PDC (Programme Delivery

setting appears. Then press

. When you press

the written line. Then press CANCEL. This line is

repeatedly, the indicator at DATE will change as

now cancelled.

change to “--:--” and the timer setting

Control) system

follows, in case today is Friday.

------

--:--

--:-- -- -

will have to be set.

The PDC system starts recording

One month later

23 MON

13:00

14:30

• Not all TV Stations transmit PDC signal

when it picks up a special signal

minus one day

25 WED 12:15

13:00

all of the time, therefore it is advisable

------

--:--

transmitted by the broadcaster

------

--:--

to check before setting PDC to ON, if

SUN-SAT

25 FRI ..... 24 SUN

WKL-FRI

------

--:--

------

--:--

you do set PDC to ON and no signal is

with the TV programme – even if

------

--:--

the TV programme starts early,

MON-SAT

MON-FRI

WKL-THU.....WKL-SAT

SELECT :

/ ENTER

received your recording might not take

late or runs on longer than

EXIT : MENU

place at all. To check PDC status,

scheduled. In step 4, press ▼

TIMER REC SET

change to the channel on your DVD/

repeatedly until PDC OFF flashes,

DATE

WKL-WED

4 Press VCR MENU (or PROGRAM) repeatedly until

VCR you wish to record from, if the

START

11:30

then press

to display "ON" for recording with PDC.

MON-SAT = everyday from

END

--:--

word "PDC" appears on the screen for

the TV-picture appears.

a few seconds then that channel is

Monday to Saturday

SPEED

WKL-SAT = each Saturday

PDC

OFF

broadcasting PDC and you can set the

SELECT :

feature to ON.

SET

EXIT

: MENU

Stereo recording and playback				Stereo recording and playback
This DVD/VCR is capable of recording	Preparation:			Playback
sound in Hi-Fi system. The recording	• Turn ON the TV and set to the video input mode.			Use AUDIO SELECT to select under stereo/mono or bilingual
will be performed automatically.	• Press VCR to select the VCR mode. (The VCR indicator will light.)			playback. See the table below for more information.
NICAM STEREO broadcasts are						(Mixed sounds)
recorded in its original sound system	NICAM stereo sound reception:			On-screen indications	Stereo playback	Bilingual playback
regardless of the setting. If you wish	NICAM stereo sound reception:			(for 4 sec.)	performed in:	performed as follows:
to record NICAM programmes, select					Stereo	Simultaneously
NICAM “AUTO” as follows.	Press VCR MENU. Press	or				both languages
	1 to select NICAM. Then press	/		STEREO		from Hi-Fi track
	or ENTER to select [AUTO].				Left channel signal	One language
					Left channel signal	One language
					output from both	dubbing
	2 Press VCR MENU repeatedly until the TV picture appears.			L CH	loudspeakers	(Main sound)
				L CH

					Right channel	Original sound
	NICAM programmes are divided into 4 types as shown				signal output from	track (Sub sound)
	NICAM programmes are divided into 4 types as shown				both loudspeakers
	below.			R CH	both loudspeakers
	below.			R CH
	NICAM STEREO broadcast				Mono	One language
	“NICAM ST” illuminates when a NICAM				Mono	One language
	STEREO broadcast signal is received.		NICAM ST			dubbing
						(Main sound)
	NICAM MONO A broadcast			HiFi signal indication
	“NICAM M1” illuminates when a NICAM			It displays for approx. 4 seconds
	MONO A broadcast signal is received.		NICAM M1	when playing HiFi video cassette
				tapes.	HI-FI
	NICAM MONO A B broadcast
	“NICAM M1/2” illuminates when a NICAM		NICAM M1/2
	MONO A and MONO B broadcast signal is		NICAM M1/2
	received.
	NICAM OFF
	It will be displayed for the NICAM signal
	when the “NICAM [OFF]” is selected in		NICAM OFF
	menu screen.
Note:				Note:
Note:				When playing Hi-Fi cassette tapes re-
When listening to a stereo broadcast or				corded on another VCR, the sound out-
playing back a Hi-Fi tape recorded in				put may be distorted. This is normal and
stereo, you have to connect the DVD/				no indication of a unit malfunction. Try to
VCR with the stereo audio system or the				minimize sound distortions by using
stereo TV.				SET +/– or change to MONO by pressing
				AUDIO SELECT.
30						31

Timer recording

Timer recording

To enter other pro-

unattended recording of up to 8 pro-

grams within 1 month.

press VCR MENU

) blinks on the display in

2 Each line stands for one pro-

end.

one line with

or . Then

repeat-

. Then press

to accept it.

mode.

(1) and Tape speed (LP) in the

Timer Recording Special Case

MON-SAT: Monday to Saturday) Timer recording

again.

To record with the PDC (Programme Delivery

. When you press

Control) system

WKL-FRI

MON-SAT

MON-FRI

Stereo recording and playback

Stereo recording and playback

will be performed automatically.

NICAM “AUTO” as follows.

below.

NICAM STEREO broadcast

NICAM MONO A broadcast

HiFi signal indication

NICAM MONO A B broadcast

NICAM OFF