Function setup
Customizing the Function Settings (continued)
Setting details
Set Password DVD
New Password can be set to replace the default password.
1) | Press SETUP button. | |
2) | Press | / button to select Rating. |
3) | Press | button, then use the / button to select Set |
Password.
4)Press ENTER button. “Enter Password” screen will appear.
5)Press the number buttons to input the current password (If the password has not been set yet after you purchase this unit, it is “8888”). Then press
ENTER.
6)Press ENTER button again, “New Password” screen will appear. Press the number buttons to input the new password.
7)Press ENTER button, “Confirm Password” screen will appear. Enter the same password again for confirmation.
8)Press ENTER button. Now your new password has been set. Be sure to remember this number!
If you forget the password, you can erase your current password by pressing number button 8 on the remote control four times, then press ENTER button to confirm the setting.
PASSWORD: 8888
Misc
Screen saver | : On |
HDMI Control | : Off |
DivX® Registration
Some DivX®
1) | Press SETUP button. | |
2) | Press | / button to select Misc. |
3) | Press | button, then use the / button to select |
DivX Registration.
4)Press ENTER button, your registration code will be shown.
5)Press ENTER button.
6)Press SETUP button to exit the menu.
Screen saver | : On |
DivX RVideo On Demand
Your registration code is :
Note
This registration code is for DivX®
Screen Saver
Use Default Settings
If you want to return the inital language setting such as Language, Video, Audio and etc. to the factory default, do the following:
1) | Press SETUP button. |
| |
2) | Press | / button to select Misc. |
|
3) | Press | button to select Use Default Settings, then | |
| press ENTER button. |
| |
4) | Press | / button to select “Yes”, then press ENTER | |
| button. The original setting will be restored. |
| |
|
| Screen saver | : On |
|
| Do you want to use default setting? |
Note
When you reset the DVD player to the factory default, the DVD player will take
To turn on or off the screen saver (screen protection to prevent image burn).
1) | Press SETUP button. | |
2) | Press | / button to select Misc. |
3) | Press | button, then use the / button to select |
| Screen saver. | |
4) | Press ENTER button, then use the / button to | |
| select the On or Off mode. | |
5) | Press SETUP button to exit the menu. |
Screen saver | Off |
HDMI Control | On |
: Off |
Note
When you leave the unit in DVD stop mode for approximately 2 minutes, the screen saver of the DVD player automatically appears if you set the Screen saver to On mode.To turn off the screen saver, press the PLAY button.
36