271, To remove the disc Press OPEN/CLOSE

2,4	To obtain a higher quality picture

IOccasionally, some picture noise not usually visible during a normal broadcast

may appear on the TV screen while playing a DVD video disc because the high

--STOP

resolution pictures on these discs include a lot of information. While the amount of

--PLAY

noise depends on the TV you use with this DVD video player, you should generally

reduce the sharpness adjustment on your TV when viewing DVD video discs.

-%_PAUSE

• About _@@

ENTER

The

icons on the

heading

bar

show the playable discs for the

A/V

function described under that heading.

00{_

:You

can

use

this

function

with

DVD

video discs.

000

TOP MENU

:You

can

use

this

function

with

VIDEO

CDs.

0{-)0

_c-5_ :You can use this function with audio CDs.

000

•To pause playback (still mode) Press PAUSE/STEP during playback.

PAUSE/STEP To resume normal playback, press the PLAY button.

•The sound is muted during still mode.

•To stop playback Press STOP.

STOP

•To remove the disc Press OPEN/CLOSE.

OPEN/CLOSE Remove the disc after the disc tray opens completely.

Be sure to press the OPEN/CLOSE button to close the disc tray after you remove the disc.

•To turn the power off (To enter the standby mode) Press ON/STANDBY to turn the ON/STANDBY indicator off.

Note

Be aware that this equipment is still powered even after the ON/STANDBY indicator turns off (standby mode) by pressing the ON/STANDBY button. To disconnect this equipment completely from the mains power, pull out the power plug from the wall outlet.

•About the screen saver

If you pause a picture of a DVD video disc and leave it still for a long while, the screen saver of the DVD video player automatically appears (when "Screen Saver" is set to "On" [_). To turn off the screen saver, press the PLAY button.

•Automatic Power Off function

If the DVD video player is stopped, or the screen saver is engaged for approximately 20 minutes, the DVD video player will automatically turn itself off.

1313

_3 ,.<:

(3- 0J

Notes

•Do not move the DVD video player during playback. Doing so may damage the disc.

•Use the OPENICLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the DVD video player to malfunction.

•Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video player to malfunction.

•In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the STOP button on your remote control once the movie is completed.