English
Introduction
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference Should the unit require maintenance, contact an authorized service location.
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Be aware that this equipment is still powered when in standby mode. To disconnect this equipment completely from the mains power, pull out the power plug from the wall outlet.
Environmental Information
All unnecessary packaging has been omitted. The packaging has been made easy to separate into three materials; cardboard (box), polystyrene foam (buffer) and polyethylene (bags,protective foam sheet).
Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
LASER |
|
Type | Semiconductor laser |
| InGaAIP(DVD) |
| AIGaAs(CD) |
Wave length | 658 nm(DVD) |
| 790 nm(CD) |
Output Power | 10.0 mW(DVD) |
7.0mW(VCD/CD)
Beam divergence 60 degrees
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video player.
Model No.Serial No.
Retain this information for future reference.