Toshiba RD-XS30B owner manual Digest Playback Skip Search, To return to the beginning of the title

Resuming playback from the location last stopped (Title Resume)

The recorder memorizes the location you last stopped playback to resume there.

To use this function, set “HDD/RAM Title Play” ( page 141) to “Title Resume”. The recorder will memorize the location you last stopped at in each title, so you can resume playback there. For example, if there are 6 titles, you can start each of them as if you had stored 6 video tapes in the recorder.

•To return to the beginning of the title

During playback, press the QUICK MENU button, then press the / buttons to select “Restart Title”, then press the ENTER button.

•To play another title

Press the CONTENT MENU button to display “CONTENT MENU Title List”, then select a title.

You can make the recorder memorize only the very last point, regardless of the number of titles. Set “HDD/ RAM Title Play” ( page 141) to “Serial Playback”.

•To return to the beginning of the title

Press the SKIP () button repeatedly until you reach the first title.

•To play the other title

Press the SKIP ( / ) button repeatedly.

Notes

•Depending on the status or the contents, playback may not start from the location last stopped, but instead another location. For example, from the beginning of the disc or title.

•Depending on the disc, there may be a slight difference between the location the recorder memorized and the actual location where playback starts.

Digest Playback (Skip Search)

This feature enables you to see the digest of a recorded content (title) by playing for three seconds and skipping one minute before next replay. The Skip Search starts from the beginning of a title and proceeds to the end.

1)Perform steps 1 and 2 on page 30, and select a title that you want to see with Digest Playback.

The Title List is displayed.

2)Press the QUICK MENU button. The Quick Menu is displayed.

3)Use the / buttons to select the Special Playback Mode, and press ENTER.

4)Use the / buttons to select Skip Search, and press ENTER.

The Skip Search starts.

Notes

•This feature can be used only one title recorded on the HDD or DVD-RAM disc.

•While using this feature, you cannot use speed-related functions such as fast forward or fast reverse.

•If you press ENTER while using this feature, the recorder goes back to the normal playback.

•If you press the STOP button twice while using this feature, this feature stops.

Introduction Basic operations Playback Recording

Dubbing

Editing Function setup Others

31