Universal Remote Control UR3L-SR4 manual Learning Method, Erasing a Single Learned Command

E. The Learning Method

STEP1 Press the [COMPONENT] button (CBL, TV or DVD) to be programmed and the [INPUT] buttons simultane- ously for 3 seconds until the Component LED light turns on.

STEP2 Line up the UR3L-SR4 to the other remote, head-to- head, 1 or 2 inches apart.

STEP3 Press any button on the UR3L-SR4 that you want to teach a command to. For example, if you want to teach the [MUTE] button, press the [MUTE] button.

STEP4 Press and hold the [MUTE] button on the other remote until the UR3L-SR4 Component LED light blinks twice.

*Note : The LED will blink 5 times if there was an error in the learning process. In so, repeat STEPS 3 and 4. Continue learning other buttons by repeating STEPS 3 and 4.

STEP5 Once you have completed teaching UR3L-SR4 all desired commands for that Component, save the learned commands by pressing the [COMPONENT] and [INPUT] buttons simultaneously until the Component LED blinks 3 times. Now test all the but- tons to make sure they learned correctly.

F. Erasing a Single Learned Command

STEP1 Press the [COMPONENT] and [INPUT] buttons simul- taneously for 3 seconds until the Component LED light turns on.

STEP2 Press and hold the button you want to erase for 3 seconds. The Component LED will blink twice to con- firm the erasure.

STEP3 To exit, press and hold both the [COMPONENT] and [INPUT] buttons simultaneously until the Component LED blinks 3 times.

5