TV operation
TV operation
TV operation
POWER 0–9
VOL +/–
1 To turn on the TV/DVD, press POWER. The Power indicator will light.
POWER
2 Adjust the volume level by pressing VOL + or
VOL – | VOL + |
VOLUME 32
3 Set the TV/CABLE selection to the appropriate position. (See page 23.)
TV - VHF/UHF channels
CABLE - Cable TV channels
4 Press direct channel selection
TV mode direct channel selection When the TV/CABLE selection is in the TV position, all channels can be instantly selected by using two buttons. (for example, to select channel 2, press “0”, then “2”. If
you press only “2”, channel selection will be delayed for a few seconds.) For channels 10 and above, press the 2 digits in order.
CABLE mode direct channel selection
When the TV/CABLE selection is in the CABLE position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
NOTE FOR CHANNELS
If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.
TV | CATV |
VHF | VHF |
UHF | STD/HRC/IRC |
| (A) (W) |
| |
| (AA) (WW) |
| |
| (AAA) (ZZZ) |
| |
| (86) (94) |
| |
| |
| |
| (100) (125) |
| 01 |
| (5A) |
|
|
Notes:
• If a channel with no broadcast is selected, the sound will auto- matically be muted.
• If a station being viewed stops broadcasting, the TV will auto- matically shut itself off after 15 minutes.
20
5K30401B [E] | 20 |
20/4/04, 15:27