Toshiba MD24FP1 owner manual Reception disturbances, Others

Page 45

Reception disturbances

Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.

IGNITION

Black spots or horizontal streaks may appear, the picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.

GHOSTS

Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected by tall buildings, hills or other large objects. Changing the direction or position of the antenna may improve the reception.

SNOW

If the TV/DVD is located far from the TV station, in a fringe reception area where the signal is weak, small dots may appear in the picture. If the signal is extremely weak, the installation of a larger external antenna may be necessary.

Others

RADIO FREQUENCY INTERFERENCE (RFI)

Caused by two-way radios, this type of interference produces moving ripples or diagonal streaks in the picture. Some cases may cause a loss of contrast in the picture. Changing the direction and position of the antenna or installing an RFI filter may improve the picture.

PICTURE SIZE VARIATION

A slight picture size variation is normal when you adjust the CONTRAST or BRIGHTNESS settings.

CARE AND MAINTENANCE

To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning.

The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture. Use caution when cleaning or wiping the plastic parts.

45

5M40101A [E] (P44-48)

45

20/4/04, 16:42

Image 45

Contents MD24FP1 Introduction Important SafeguardsAccessories CleaningPower Source POWER-CORD ProtectionReplacement Parts Power LinesSafety Check ConnectingTo USE AC Power Source Power sourceLaser Beam DiscDo not use the unit when moisture condensation may occur PrecautionsTo obtain a clear picture WaitStructure of disc contents On cleaning discsOn handling discs On storing discsOn Video CDs Playable discsDVD Contents Identification of controls FrontRear CH +/- buttons VOL +/- buttons Remote controlDVD Menu button Direction buttonsOperation Inserting batteriesAntenna connections ConnectionsConnections Cable TV connections For subscribers to basic cable TV serviceSignal flow Connecting to optional equipmentVCR Rear of TV/DVDDolby Digital Connecting to an amplifier equipped with a DTS decoderDolby Surround Pro Logic Digital Theater Systems DTSChannel digital stereo MPEG2 soundStarting setup Starting setupBasic setup EnterSetting the language Setting the languageBasic setup Press MENU, then press or to select optionTV operation TV operationTV operation TV VHF/UHF channels Cable Cable TV channelsHeadphones Game ModeChannel UP/DOWN SleepClosed captions What is Closed CAPTIONING?Closed captions To View Closed CaptionsTo memorize channels Automatic memory tuningTV/CABLE selection To ADD/DELETE channelsTo register password Setting the V-ChipTo change password Press or to select PasswordOFF To set the V-ChipTV-Y TV-GPicture control adjustment Picture control adjustment Adjusting the picture preferenceAdjusting the picture preference Mode Picture qualityListening to stereo sound Sound control adjustmentListening to SAP Second Audio Program To select desired soundPlaying a disc Vcdcd Basic playbackBasic playback To obtain a higher quality picture To pause playback still modeTo stop playback To remove the discVcddvd Playing frame by frame VCD Playing in fast reverse or fast forward directionsVcddvd Playing in slow-motion VCD Locating a chapter or trackZooming/Locating desired scene CancelVcddvd Zooming VCD Locating desired sceneRepeat playback/A-B Repeat playback VCD Repeat playbackVCD A-B Repeat playback Program playback/Random playback Vcdcd Program playbackVCD Random playback Changing angles Changing angles/Title selection/DVD menuTitle selection DVD menuChanging soundtrack language/ Subtitles DVD Changing soundtrack languageSubtitles Karaoke playback Karaoke playback/Disc status/ To turn off the PBCVCD Disc status VCD To turn off the PBCCD MP3/WMA/JPEG CD information MP3/WMA/JPEG CD operation5Press Stop to end playback CD MP3/WMA CD playbackAbout file menu Press EnterCD Slide show playback CD Jpeg CD playbackPress ENTER. The selected picture appears On the screen Rotating an imageVCD Setting procedure Customizing the function settingsSetting details Parental control setting If you forget the passwordDRC To change the parental levelPlayback will commence if the entered password was correct Load a DVD disc and press Play or OPEN/ Close on the unitReturn Others Language code listOthers Reception disturbancesTroubleshooting Symptoms Possible Solutions PowerTV Broadcast Reception Remote Control Symptoms Possible Solutions DVDSupplied accessories SpecificationsGeneral Input/OutputLimited Ninety 90 Day Warranty Limited warrantyContinental United States contact How to Obtain Warranty ServiceMemo 04/03 U