Toshiba 32LV37U, 32LV17U manual LED indications, LED Indication Condition Solution

Page 71

Chapter 9: Troubleshooting

LED indications

The green and yellow LED lights on the TV front indicate the TV’s status, as described below.

Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.

TV front

DISC POWER

Yellow LED Green LED

 

LED Indication

Condition

Solution

1)

Green is ON (solid).

The TV is operating properly.

 

 

 

 

2)

Yellow is ON (solid).

A disc is in the disc slot.

 

 

 

 

3)

Yellow blinks three

TV is powering up.

Wait several seconds until the yellow LED stops

 

times.

 

blinking.

 

 

 

 

4)

Green blinks slowly.

Abnormal operation of BUS line.

Turn OFF the TV and unplug the power cord.

 

 

 

Plug the power cord in again and turn ON the TV.

5)

Green blinks

Power protect detection.

 

 

quickly.

 

 

 

 

 

 

If, after trying the solutions, the problem still exists:

In the U.S., call TACP Consumer Solutions at 1-800-575-5469.

In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click “Home Entertainment,” and then click “Support.”

71

Image 71
Contents 32LV17 32LV17U 32LV37 32LV37U Dear Customer Safety PrecautionsTV/DVD Combination Precautions Installation Important Safety InstructionsInstallation, Care, and Service Additional Safety PrecautionsCare ServiceChoosing a location for your LCD TV Safety and Care Information for TV/DVD Combination ModelsPrecautions On storing discs On cleaning discsStructure of disc contents On handling discsPlayable discs Location of required labelTrademark Information PartImportant notes about your LCD TV/DVD combination Contents Troubleshooting Welcome to Toshiba Features of your new TVIntroduction Introduction Green and Yellow LEDs TV front and side panel controls and connectionsColorStream HD-1 and ColorStream HD-2 TV back panel connectionsAbout the connection illustrations Connecting your TVOverview of cable types To view the VCR Connecting a VCR and antenna or Cable TV no Cable boxTo view the antenna or Cable signal You will needStandard audio cables Connecting a VCR with S-video and a cable boxTo view basic and premium Cable channels Coaxial cables Video cableTo record a TV program while watching a DVD To view antenna or Cable channelsTo view the DVD player To view the VCR or view and record antenna channelsSelect the Video 2 video input source on the TV Connecting a camcorderTo view the camcorder video To connect a DVI device, you will need Connecting an Hdmi or DVI device to the Hdmi inputTo connect an Hdmi device, you will need To view the Hdmi device videoTo control the audio Connecting an audio systemTo connect a PC to the Hdmi terminal on the TV Connecting a personal computer PCTo connect a PC to the PC in terminal on the TV Remote control effective range Using the remote controlPreparing the remote control for use Installing the remote control batteriesChapter SLOW, ANGLE, SUB TITLE, AUDIO, and EjectDVD player or HTIB, set the Mode Select switch to Using the remote control to control your other devicesTo use your TV remote control to operate a VCR, set the Mode Select switch to AUXAUX 1 VCR Remote Control functional key chartProgramming the remote control to control your other devices DVD/VCR Combo Cable converter boxSatellite receiver TV/VCR ComboHtib Icon Option Menu layout and navigationMain menu layout Navigating the menu system Setup/Installation menu layoutSetup menu InstallationSelecting the menu language Setting up your TVTo configure the ANT input source Input Configuration, and press TTo add or delete channels in the channel memory Programming channels automaticallyManually adding and deleting channels in the channel memory To program channels automaticallyLabeling channels To delete the custom label Setting the Hdmi audio modeTo set the Hdmi audio mode To create and assign a custom labelViewing the system status Viewing the digital signal meterHighlight No and press Reset Factory DefaultsTo cancel the reset To select the video input source to view Using the TV’s featuresSelecting the video input source to view Labeling the video input sourcesFavorites Browser Tuning channelsTuning channels using Channel Browser Adding and clearing channels and inputs in the History List Elements of the Channel BrowserSwitching between two channels using SurfLock Tuning to a specific channel programmed or unprogrammedSwitching between two channels using Channel Return TheaterWide 2 picture size for letter box programs Selecting the picture sizeNatural picture size TheaterWide 1 picture size for 43 format programsFull picture size for 169 480i, 480p source programs only To set the scroll settingsTo set the Cinema Mode to Video To turn on the auto aspect ratio featureTo turn off the auto aspect ratio feature To set the Cinema Mode to FilmAdjusting the picture quality Adjusting the pictureSelecting the picture mode To view captions or text Using the closed caption modeDigital CC Settings Base closed captionsMuting the sound Adjusting the audioUsing the digital audio selector CC SelectorTo listen to stereo sound Adjusting the audio qualityTo adjust the audio quality Selecting stereo/SAP broadcastsUsing the Dolby Digital Dynamic Range Control feature Using the StableSound featureChanging your PIN code Using the Locks menuEntering the PIN code If you cannot remember your PIN codeTo download the additional rating system if available Press b to highlight Enable Rating BlockingBlocking TV programs and movies by rating V-Chip To block and unblock TV programs and moviesTo unblock individual channels Blocking channelsTo block channels Unlocking programs temporarily Using the input lock featureTo lock the control panel Using the PC settings featureUsing the control panel lock feature To adjust the PC settingsSetting the sleep timer Setting the PC AudioTo display TV status information using Info Understanding the auto power off featureUnderstanding the last mode memory feature To display TV status information using RecallUsing the static gamma feature Using the TV’s advanced featuresUsing the advanced picture settings features Using dynamic contrastTo change the CableClear settings Selecting the color temperatureUsing CableClear digital noise reduction To select the color temperatureTo turn off Game Mode Using Mpeg noise reductionUsing the Game Mode feature To turn on Game ModeOn or Off Using the advanced audio settings featuresUsing the SRS WOW surround sound feature To adjust the WOW settingsBasic playback DVD VCD CD DVD PlaybackPlaying a disc To stop playback To start playback from stop modeTo pause playback still mode AboutTo resume normal playback DVD VCD CD Playing in fast reverse or fast forward DVD VCD CDTo pause playback still playback To select the DVD aspect ratioChanging angles DVD Playing frame by frame DVD VCDPlaying in slow motion DVD VCD Locating a chapter or track DVD VCD CDCase of Video CD playback Changing soundtrack languageSubtitles DVD Display example Disc status DVD VCD CDMP3/JPEG CD operation MP3/JPEG CD information VCDIndicates MP3 file Indicates Jpeg file About the menu iconsPress Sthe file is highlighted in yellow Press BbC c to select the desired file Jpeg CD playback CDGeneral troubleshooting TroubleshootingClosed caption problems DVD TroubleshootingRemote control problems Channel tuning problemsLED indications LED Indication Condition SolutionAppendix SpecificationsFormat Resolution Frequency Pixel Clock Frequency For LCD TV/DVD Combinations 26 and Larger Limited United States WarrantyFor Toshiba Brand Flat Panel Televisions Limited Canadian WarrantyDisclaimer and Limitation of Remedy Appendix DVD Index07-05