Toshiba MD20FN1/R Playback procedure, Press OPEN/CLOSE on the unit or the remote con- trol

Playback procedure

RECALL	TV/DVD	POWER
			INPUT SELECT
1	2	3
			GAME
4	5	6
			OPEN/CLOSE
7	8	9
SLEEP		CLOSED	MUTE
		CAPTION
	0
TOP MENU	SUBTITLE	AUDIO	ANGLE
SETUP/MENU DVD MENU		CANCEL	ZOOM/CH RTN
	CH +
VOL –		VOL +
RETURN	CH –		ENTER
REV	PLAY	FWD	PLAY MODE
SKIP	STOP	SKIP	JUMP
SLOW	PAUSE	SLOW	REPEAT A–B

NOTES:

•If a non-compatible disc is loaded, “Incor- rect Disc”, “Region Code Error” or “Paren- tal Error” will appear on the TV screen ac- cording to the type of loaded disc. If these appear, check your disc again (see pages 25 and 36).

•Some discs may take a minute or so to start playback.

•When you set a single-faced disc label downwards (ie. the wrong way up) and

press PLAY or OPEN/CLOSE on the unit, “” will appear on the display for 3 about seconds and then “No Disc” will be dis- played.

•Some playback operations of DVDs may be intentionally fixed by software produc- ers. Since this unit plays DVDs according to the disc contents the software produc- ers designed, some playback features may not be available. Also refer to the instruc- tions supplied with the DVDs.

•When playing DTS-encoded Audio CDs, excessive noise will be heard from the analogue stereo outputs. To avoid possi- ble damage to the audio system, the con- sumer should take proper precautions when the analogue stereo outputs of the DVD player are connected to an amplifi- cation system.

1

2

3

4

5

6

7

Press OPEN/CLOSE on the unit or the remote con- trol.

The disc tray will open.

Place a disc onto the tray. Position it with the printed label side up, align it with the guides, and place it in its proper position.

Press OPEN/CLOSE or

PLAY.

The disc tray closes auto- matically.

The TV-screen, changes to “” and then playback commences.

• A menu screen will appear on the TV screen, if the disc has a menu feature.

Press / or / to make a selection.

Press ENTER.

•Title is selected and play commences.

Press STOP to end playback.

•The unit memorizes the stopped point, depending on the disc. “ ” appears on the screen. Press PLAY to resume playback (from the scene point).

•If you press STOP again or unload the disc (“ ” appears on the screen.), the unit will clear the stopped point.

To stop the playback, press STOP. Then press OPEN/CLOSE.

The disc tray opens.

Remove the disc and press OPEN/CLOSE then press

POWER.

The disc tray closes automatically and unit turns off.

27