Cary Audio Design HD720P, HD1080P Rear Panel, Hdmi Output Jack, RGB+HV Sync Video Output Jacks

Page 14

CONTROLS AND DISPLAYS

REAR PANEL

1.RIGHT CHANNEL ANALOG OUTPUT JACK (AES/EBU Balanced)

•Use this jack for connection to the amplifier's right channel balanced input jack.

2.RIGHT CHANNEL ANALOG OUTPUT JACK (RCA Unbalanced)

•Use this jack for connection to the amplifier's RCA right channel unbalanced input jack.

3.LEFT CHANNEL ANALOG OUTPUT JACK (RCA Unbalanced)

•Use this jack for connection to the amplifier's RCA left channel unbalanced input jack.

4.LEFT CHANNEL ANALOG OUTPUT JACK (AES/EBU Balanced)

•Use this jack for connection to the amplifier's left channel balanced input jack.

5.HDMI OUTPUT JACK

•Use this jack to connect to a TV, Monitor or AV receiver that has an HDMI input.

6.480p-1080p PROGRESSIVE COMPONENT VIDEO OUTPUT JACKS

•Use these jacks to connect to a TV, Monitor or AV receiver that has progressive component video capability and inputs. The connectors used for this are BNC connections. BNC > RCA adapters are available if your display uses RCA connections.

7.RGB+HV SYNC VIDEO OUTPUT JACKS

•Use these jacks to connect to a TV, Monitor or AV receiver that has RGB+HV SYNC video inputs. These are BNC connections. Consult your dealer about matching cables.

8.480i INTERLACED COMPONENT VIDEO OUTPUT JACKS

•Use these jacks to connect to a TV, Monitor or AV receiver that has interlaced component video capability and inputs. The outputs for this section use RCA connections, with 75 Ohm cable (not included).

9.S-VIDEO OUTPUT JACK

•Use this jack to connect to a TV, Monitor or AV receiver that has an S-VIDEO input. An S-video cable is needed to use this connection (not included).

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents DVD Table of Contents Important Safety Instructions Important Safety Instructions FCC Information for User Thank YOU Product FeaturesWelcome DVD 7 offersUnpacking and Installation Format Playback CompatibilityAudio Specifications SpecificationsVideo Specifications HDMI/RGB/CVOptical Digital Toslink Dolby Digital / DTS / Lpcm Digital Audio Output SpecificationsWeight35 lbs Video Output ModesConnections to a TV Before ConnectingMaking Connections Optional Video Connections Optional Audio Connections Controls and Displays Front PanelPower Indicator DTS IndicatorVideo OFF Indicator StopRGB+HV Sync Video Output Jacks Rear PanelHdmi Output Jack Video Output JackDC Trigger Input Terminals Power Input ACComposite Video Output Jack IR Input JackRemote Control Number ButtonsChanging Settings to Match Your TV Switching onUsing the ON-SCREEN Displays Getting StartedSelect TV Type Video Setup Changing the Default SettingsChoose the Setup Menu Ntsc & PAL Video Standards Ntsc Factory defaultTV Type PALPIC Settings RGB & HdmiCaptions Angle MarkOFF Screen SaverAudio Setup Compression VolumeDigital MiddleDigital Clock 48kHz/96kHz Disc SetupLpcm 96k Factory default Lpcm 48KParental SubtitleDisc Menu Password ChangeProgressive Setup Component1024x768 RGB/HDMI800x600 1366x768AV Sync Digital OUT DelayFactory default 600 MSStopping Playback PlaybackStarting a Disc Cueing Using the Number Buttons Pausing PlaybackCueing using the Skip button FORWARD/REVERSE SearchingPlaying Bonus Groups Playing Frame by Frame for Dvds and Video CDS onlySelecting the Still Image Factory Service Service and CareCare and Cleaning NON-WARRANTY RepairsUnited States Limited Warranty Warranty DisclaimerCary Audio Design
Top Page Image Contents