Toshiba 26HF15 appendix Selecting the color temperature, Using the CableClear feature

Selecting the color temperature

Change the picture quality by selecting from three preset color tem- peratures—cool, medium, and warm—as described in the following table:

Mode Picture Quality

COOLBlueish

MEDIUMNeutral

WARMReddish

To select the color temperature:

1.Press MENU, then press or to display the PICTURE menu.

2.Press ▲ or ▼ to highlight COLOR TEMPERATURE.

P I C T U R E
C a b l e C l e a r		ON COOL
C O L O R
T E M P E R AT U R E		COOL
	COOL	/ MEDIUM / WARM
DISPLAY FORMAT		1080i
SVM		HIGH
RESET
:SELECT		:ADJUST

3.Press or to highlight the mode you prefer.

4.Press EXIT to return to normal viewing.

Using the CableClear® feature

CableClear® reduces visible interference in your TV picture. This

is useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a video cassette or disc damaged by repeated use.

To turn on the CableClear® feature:

1.Press MENU, then press or to display the PICTURE menu.

2.Press ▲ or ▼ to highlight CableClear.

PICTURE
CableClear	ON /OFF
COLOR	COOL
TEMPERATURE
DISPLAY FORMAT	1080i
SVM	HIGH
RESET
:SELECT	:ADJUST

3. Press or to select ON.

To turn off the CableClear® feature:

Select OFF in step 3.

Menu

Exit

Using the TV’s Features

Selecting the Scan Velocity Modulation (SVM)

The SVM feature enhances picture contrast and sharpness. This feature has three modes: HIGH, LOW, and OFF.

To select the SVM feature:

1.Press MENU, then press or to display the PICTURE menu.

2.Press ▲ or ▼ to highlight SVM.

PICTURE
CableClear	ON
COLOR	COOL
TEMPERATURE
DISPLAY FORMAT	1080i
SVM	HIGH
	HIGH	/ LOW / OFF
RESET
:SELECT	:ADJUST

3.Press or to select the mode you prefer.

To turn off the SVM: Select OFF in step 3.

36

Note:

SVM is not required when viewing some high-quality video material. If you are watching high-quality video material, you may want to set SVM to OFF.

J3S30521A(E)_P31-37 36 25/04/2005, 2:29 AM