Toshiba 26HF85 appendix Connecting an Hdmi or a DVI device to the Hdmi input

Page 14

Connecting an HDMI™ or a DVI device to the HDMI input

Connecting your TV

The HDMI[1] input on your TV receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI[2] device.

This input is designed to accept HDCP[3] program material in digital form from EIA/CEA-861/861B–compliant[4]consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output.)

The HDMI input is designed for best performance with high definition video signals. It will accept and display 480i, 480p, 720p and 1080i signals.

NEVER CONNECT THIS TV TO A PERSONAL COMPUTER (PC.) This TV is not intended for use with a PC.

To connect an HDMI device, you will need:

one HDMI cable (type A connector)

For proper operation, it is recommended that you use as short an HDMI cable as possible. You should not encounter difficulty if you use an HDMI cable that is shorter than 16.4 ft (5m.)

HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration below.)

You must set the HDMI audio input setting to “HDMI” in the AUDIO menu (see page 40.)

Some CDVs (Video CDs) may not output digital audio signals. In that case, you may hear sound by connecting analog audio cables. If you do use analog audio cables for this reason, you will need to set the HDMI audio input setting to “DVI” to hear the analog audio (see page 40.) Note: If you connect an HDMI device and analog audio cables and play media with digital audio output, to hear digital audio you must set the HDMI audio input setting to “HDMI” (page 40.)

HDMI device

VIDEO AUDIO

L R

IN

HDMI OUT

OUT

[1]HDMI = High-Definition Multimedia Interface.

[2]DVI = Digital Video Interface.

[3]HDCP = High-bandwidth Digital Content Protection.

[4]EIA/CEA-861/861B compliance covers the transmission of uncompressed digital video with high- bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device.

When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV.

To connect a DVI device, you will need:

one HDMI–to–DVI adapter cable (HDMI type A connector)

For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m.) The recommended length is 6.6 ft (2m.)

one pair of standard analog audio cables

An HDMI-to-DVI adapter cable transfers only video. Separate analog audio cables are required (see illustration below.)

You must set the HDMI audio input setting to “DVI” in the AUDIO menu (see page 40.)

DVI device

VIDEO

AUDIO

DVI

 

L

R

OUT

IN

OUT

TV

TV

HDMI, the HDMI logo, and High-Definition Multimedia

 

Interface are trademarks or registered trademarks of HDMI

14

Licensing, LLC.

 

J3S40121B(E)_P07-15

14

24/02/2005, 6:06 PM

Image 14
Contents 26HF85 30HF85 Child Safety Important Safety Instructions Care Using the remote control Important Safety Information Welcome to ToshibaConnecting your TV Setting up your TVSelecting a location for the TV Welcome to ToshibaExploring your new TV Stereo VCR Connecting your TVConnecting a VCR Connecting a cable converter box or Antenna Option 1 For Subscribers to Basic Cable TV ServiceConnecting a DVD player/satellite receiver and a VCR DVD player with Component video DTV Receiver With Component video Connecting two VCRs Connecting a camcorder Connecting an Hdmi or a DVI device to the Hdmi input To connect a DVI device, you will needConnecting an audio system AmplifierInstalling the remote control batteries Using the remote controlPreparing the remote control for use Using the remote control to operate your other devicesProgramming the remote control to operate your other devices To control a DVD playerVCR Htib Learning about the remote control Using RemoteChanging the on-screen display language Setting up your TVStarting setup Programming channels automatically Image tilt correctionAdding channels to the TV’s memory Adding and erasing channels manuallySwitching between two channels Using the TV’s featuresAdjusting the channel settings Changing channelsTo select your password and access the Locks menu Using the Locks menuSelecting a password To clear your favorite channelsUsing the V-Chip parental control feature Locking channels To set up the GameTimer Setting the GameTimerTMTo set up the video lock Locking the video inputsUsing the front panel lock feature Labeling channelsTo label the video input sources Selecting the video input sourceLabeling the video input sources Setting the clock Setting the ON/OFF timerSelecting the picture size Natural picture sizeFull picture size for 169 source programs Damage is not Covered by Your WarrantyTheaterWide 2 picture size for letter box programs Scrolladjustmentto +20 Scrolling the TheaterWide picture TheaterWide 2 and 3 onlySelecting the display format for 480p signals only Selecting the cinema modeUsing the Aspect feature To select the picture mode Adjusting the picture Selecting the picture modeAdjusting the picture quality To adjust the picture qualitySelecting the Scan Velocity Modulation SVM Selecting the color temperatureUsing the CableClear feature Using the closed caption feature Resetting your picture adjustmentsSetting the sleep timer To adjust the sound quality Adjusting the sound Muting the soundAdjusting the sound quality Selecting stereo/SAP broadcastsUsing the BBE sound feature Resetting your audio adjustmentsUsing the StableSound feature Displaying on-screen information Turning off the built-in speakersSelecting the Hdmi audio input source Troubleshooting Auto power offUnderstanding the Power Return feature Symptom SolutionVIDEO/AUDIO Input SpecificationsVideo Input VIDEO/AUDIO OutputLimited United States Warranty National Service Division
Related manuals
Manual 44 pages 3.48 Kb