Toshiba 26LV47 Connecting an Hdmi or DVI device to the Hdmi input, To view the Hdmi device video

Page 20

Chapter 2: Connecting your TV

Connecting an HDMI™ or DVI device to the HDMI input

The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D–compliant[1]consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).

The HDMI input can accept and display VGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/ 60Hz) signal formats. For detailed signal specifications, see page 72.

Supported Audio format: Linear PCM, sampling rate 32/44.1/ 48 kHz

Note: To connect a PC to the HDMI input, see page 22.

To connect an HDMI device, you will need:

•one HDMI cable (type A connector) per HDMI device

–For proper operation, it is recommended that you use an

HDMI cable with the HDMI Logo ( ).

–To display an 1080p/60Hz signal format, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly.

–HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration).

–See “Setting the HDMI™ audio mode” (- page 35).

TV lower back panel

HDMI device

VIDEO

AUDIO

HDMI OUT

L

R

 

IN IN

OUT

LR

To view the HDMI device video:

Select the HDMI 1, HDMI 2, or HDMI 3 video input source on the TV.*

*To select the video input source, press INPUT on the remote control (- page 24). To program the TV remote control to operate other devices, see Chapter 3.

To connect a DVI device, you will need:

•one HDMI-to-DVI adapter cable (HDMI type A connector) per DVI device

–For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

•one pair of standard analog audio cables per DVI device

–An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration).

–See “Setting the HDMI™ audio mode” (- page 35).

TV upper back panel

 

 

 

 

 

 

 

 

TV lower back panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVI device

VIDEO

AUDIO

DVI/HDCP

L

R

OUT

 

IN IN

 

 

OUT

L

R

Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

•When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device.

•When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV.

[1]EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high- definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 26LV47 26LV47Dear Customer Safety PrecautionsTV/DVD Combination Precautions Important Safety Instructions Installation, Care, and ServiceAdditional Safety Precautions InstallationService CareChoosing a location for your LCD TV Safety and Care Information for TV/DVD Combination ModelsPrecautions On cleaning discs Structure of disc contentsOn handling discs On storing discsLocation of required label Playable discsTrademark Information PartImportant notes about your LCD TV/DVD combination Contents Troubleshooting Welcome to Toshiba Features of your new TVIntroduction Introduction TV front and side panel controls and connections Green and Yellow LEDsTV back panel connections ColorStream HD-1 and ColorStream HD-2About the connection illustrations Connecting your TVOverview of cable types Connecting a VCR and antenna or Cable TV no Cable box To view the antenna or Cable signalYou will need To view the VCRConnecting a VCR with S-video and a cable box To view basic and premium Cable channelsCoaxial cables Video cable Standard audio cablesTo view antenna or Cable channels To view the DVD playerTo view the VCR or view and record antenna channels To record a TV program while watching a DVDSelect the Video 2 video input source on the TV Connecting a camcorderTo view the camcorder video Connecting an Hdmi or DVI device to the Hdmi input To connect an Hdmi device, you will needTo view the Hdmi device video To connect a DVI device, you will needConnecting an audio system To control the audioTo connect a PC to the Hdmi terminal on the TV Connecting a personal computer PCTo connect a PC to the PC in terminal on the TV Using the remote control Preparing the remote control for useInstalling the remote control batteries Remote control effective rangeSLOW, ANGLE, SUB TITLE, AUDIO, and Eject ChapterUsing the remote control to control your other devices To use your TV remote control to operate aVCR, set the Mode Select switch to AUX DVD player or HTIB, set the Mode Select switch toRemote Control functional key chart AUX 1 VCRProgramming the remote control to control your other devices Cable converter box Satellite receiverTV/VCR Combo DVD/VCR ComboHtib Icon Option Menu layout and navigationMain menu layout Setup/Installation menu layout Setup menuInstallation Navigating the menu systemSetting up your TV To configure the ANT input sourceSelecting the menu language To select the menu languageProgramming channels automatically Manually adding and deleting channels in the channel memoryTo program channels automatically To add or delete channels in the channel memoryLabeling channels Setting the Hdmi audio mode To set the Hdmi audio modeTo create and assign a custom label To delete the custom labelViewing the digital signal meter Viewing the system statusSetting up your TV Using the TV’s features Selecting the video input source to viewLabeling the video input sources To select the video input source to viewFavorites Browser Tuning channelsTuning channels using Channel Browser Elements of the Channel Browser Adding and clearing channels and inputs in the History ListSwitching between two channels using SurfLock Tuning to a specific channel programmed or unprogrammedSwitching between two channels using Channel Return Selecting the picture size Natural picture sizeTheaterWide 1 picture size for 43 format programs TheaterWide 2 picture size for letter box programsTo set the scroll settings Full picture size for 169 480i, 480p source programs onlyTo turn on the auto aspect ratio feature To turn off the auto aspect ratio featureTo set the Cinema Mode to Film To set the Cinema Mode to VideoAdjusting the picture quality Adjusting the pictureSelecting the picture mode Using the closed caption mode Digital CC SettingsBase closed captions To view captions or textAdjusting the audio Using the digital audio selectorCC Selector Muting the soundAdjusting the audio quality To adjust the audio qualitySelecting stereo/SAP broadcasts To listen to stereo soundUsing the StableSound feature Using the Dolby Digital Dynamic Range Control featureUsing the Locks menu Entering the PIN codeIf you cannot remember your PIN code Changing your PIN codePress b to highlight Enable Rating Blocking Blocking TV programs and movies by rating V-ChipTo block and unblock TV programs and movies To download the additional rating system if availableTo unblock individual channels Blocking channelsTo block channels Using the input lock feature Unlocking programs temporarilyUsing the PC settings feature Using the control panel lock featureTo adjust the PC settings To lock the control panelSetting the PC Audio Setting the sleep timerUnderstanding the auto power off feature Understanding the last mode memory featureTo display TV status information using Recall To display TV status information using InfoUsing the TV’s advanced features Using the advanced picture settings featuresUsing dynamic contrast Using the static gamma featureSelecting the color temperature Using CableClear digital noise reductionTo select the color temperature To change the CableClear settingsUsing Mpeg noise reduction Using the Game Mode featureTo turn on Game Mode To turn off Game ModeUsing the advanced audio settings features Using the SRS WOW surround sound featureTo adjust the WOW settings On or OffBasic playback DVD VCD CD DVD PlaybackPlaying a disc To start playback from stop mode To pause playback still modeAbout To stop playbackPlaying in fast reverse or fast forward DVD VCD CD To pause playback still playbackTo select the DVD aspect ratio To resume normal playback DVD VCD CDPlaying frame by frame DVD VCD Playing in slow motion DVD VCDLocating a chapter or track DVD VCD CD Changing angles DVDCase of Video CD playback Changing soundtrack languageSubtitles DVD Disc status DVD VCD CD MP3/JPEG CD operationMP3/JPEG CD information VCD Display exampleIndicates MP3 file Indicates Jpeg file About the menu iconsPress Sthe file is highlighted in yellow Jpeg CD playback CD Press BbC c to select the desired fileTroubleshooting General troubleshootingDVD Troubleshooting Channel tuning problemsClosed caption problems Rating blocking V-Chip problemsLED Indication Condition Solution LED indicationsAppendix SpecificationsFormat Resolution Frequency Pixel Clock Frequency Limited United States Warranty For LCD TV/DVD Combinations 26 and LargerLimited Canadian Warranty For Toshiba Brand Flat Panel TelevisionsDisclaimer and Limitation of Remedy Appendix Index DVD07-08
Top Page Image Contents