Toshiba 30HFX84 appendix Image tilt correction, Adding channels to the TV’s memory

Image tilt correction

When you install or change the direction of the TV, the picture may become tilted (caused by the Earth’s magnetism). If this happens, use the image tilt correction feature to obtain the best possible picture.

To adjust the image tilt:

1.	Press MENU, then press			or
	until the SETUP menu appears.				SETUP
2.	Press ▲ or ▼ to highlight IMAGE				CLOSED CAPTION	OFF
	TILT.				PICTURE SCROLL
					PICTURE SIZE
3.	Press	or	to adjust the picture		CINEMA MODE	VIDEO
					ASPECT	OFF
					IMAGE TILT	0
	tilt (from –10 to +10).				:SELECT	:ADJUST

Adding channels to the TV’s memory

When you press CH ▲ or ▼, your TV will stop only on the channels you have stored in the TV's channel memory. Follow the steps below to program channels into the channel memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase channels manually.

To add channels automatically:

1.Press MENU, then press or to display the SETUP menu.

2.Press ▲ or ▼ until the TV/CABLE

selection is highlighted.
3. Press or to highlight either	SETUP
	LANGUAGE	ENGLISH
TV or CABLE, depending on
	CLOCK SET	12:00AM
which you use.	TV / CABLE	TV /	CABLE
	CH PROGRAM
	ADD / ERASE	ADD
If you use an antenna, choose TV.	:SELECT	:ADJUST
If you use cable, choose CABLE.

4.Press ▼ until the CH PROGRAM selection is highlighted.

5.Press or to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message “PROGRAMMING NOW-PLEASE WAIT” appears.

6.When channel programming is complete, the message “COMPLETED” appears.

7.Press CH ▲ or ▼ to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1.Select the channel you want to add or erase. If adding channels, you must select the channel to add using

the Channel Number buttons.
2. Press MENU, then press or	to	SETUP
		LANGUAGE	ENGLISH
display the SETUP menu.
		CLOCK SET	11:02PM
		TV / CABLE	CABLE
3. Press ▲ or ▼ to highlight ADD/		CH PROGRAM
		ADD / ERASE	ADD	/ ERASE
ERASE.		:SELECT	:ADJUST

4.Press or to select ADD or

ERASE, whichever function you want to perform.

5.Repeat steps 1-4 for other channels you want to add or erase.

25

Menu

Channel ▲▼

Safeguards Important

Welcome to Toshiba

Connecting your TV

Using the Remote Control

Setting up your TV

Using the TV’s Features

Appendix

3R40321A/E P24-26 25 9/7/04, 15:07