Toshiba 37AV500A Activating the DNR Digital Noise Reduction, Selecting the color temperature

Page 20
Warm:
Cool:

Using the TV’s features (General)

Activating the DNR (Digital Noise

Reduction)

If the receiving signal is weak and the picture is blurry, the picture may be improved when using this function.

1From the Picture menu, press ￿ or ￿ to select DNR

then press .

2Press￿ or ￿ to select an item you want to adjust, press￿ or ￿ to adjust the settings as required.

Note:

In the PC input mode, this mode is not available.

Selecting the color temperature

You can change the tone of the picture by selecting from three preset color temperatures: Cool, Normal or Warm.

1From the Picture menu, press ￿ or ￿ to select Color

Temp then press .

2Press ￿ or ￿ to select mode you prefer.

Lends a blue hue to the picture.

Normal: Neutral

Lends a red hue to the picture.

Using the active backlight control

In order to improve screen visibility, the active backlight control sets the screen brightness automatically during dark scenes.

1From the Picture menu, press ￿ or ￿ to select

Backlight then press .

2Press ￿ or ￿ to select Off or On.

3If you want to adjust Backlight manually, turn Active Backlight Control to Off, then press ￿.

4Press ￿ or ￿ to adjust the settings as required.

10

Using the cinema mode

A movie film’s picture runs at 24 frames a second, whereas movie software such as DVD, etc., that you enjoy watching on television at home runs at 30 (NTSC) or 25 (PAL) frames a second. To convert this signal to reproduce a smooth motion and picture quality, select the On mode.

Effective signal and setup conditions:

When the Video input mode is selected.

When the input signal format is 480i and 576i signals.

1Press, then press ￿ or ￿ to display the PICTURE

menu then press .

2Press ￿ or ￿ to select Cinema Mode then press .

3Press ￿ or ￿ to turn On or Off.

 

 

 

 

Menu...[PICTURE...Cinema Mode]

Picture Mode

Cinema Mode

 

 

Off

 

Cinema Mode

 

 

 

 

Color Temp

 

 

 

Aspect Ratio

 

 

 

Backlight

 

 

 

DNR

 

 

 

 

 

 

 

OK Confirm MENU Return

Navigate EXIT Cancel

Note:

When a DVD movie with subtitle is playing back, this mode may not work correctly.

Cinema Mode only support to Video 1, Video 2, HDMI 1 and HDMI 2 input sources.

20

Image 20
Contents Page Contents Important Safety Instructions InstallationIntroduction Welcome to ToshibaNever stand or climb on the TV Precautions for installing on outdoor antennaUse Service Never repair, modify or disassemble the TV by yourselfCleaning Important informationConnecting an antenna Installing the remote control batteriesRemove the battery cover Getting startedTV front, control and side panel For the use of each control, see the pages in brackets26/ 32/ 37 TV Control panel 42 TVTV back panel connections Learning about the remote control When in TV modeWhen using Toshiba STB or DVD When using Toshiba DVDAbout DTV Menu Displaying the Digital TV/Analog TV Setup menu chartLearning about the menu system Switching on the TV Switching off the TVTurning the TV on About ATV MenuTuning the TV for the first time Programming channels into the TV’s channel memoryManual Search digital only Sorting program position From the SET UP menu, Press and or to select Favorite ChannelSetting the On-Screen-Display Time Watching TV programsViewing Digital programs digital only Selecting the menu languageSelecting the picture size Using the TV’s features GeneralPicture adjustment Using the picture still Adjusting the picture position PC onlyAutomatically Adjusting the picture position Selecting the picture modeSelecting the color temperature Using the active backlight controlUsing the cinema mode Activating the DNR Digital Noise ReductionSound adjustment Selecting the dual 1 or dual 2 modeAdjusting the sound quality Selecting the stereo programs analog onlyTimers Using the Bass BoostSetting the Current Time Setting the Wakeup TimerSetting up the teletext mode Selecting the video input source to viewTeletext in Analog TV Teletext general informationUsing Auto mode Using List modeTeletext buttons on the remote control Press to return to the 100 page or initialReset all default setting Reset to default and pressThis will do Reset to default, Are you sure? Teletext in Digital TVOther Digital TV features and settings Setting the EPG Electronic Program guidePassword Parental RatingSelecting The Audio Mode AV ConnectionSubtitle Audio PreferenceConnecting your TV Connecting an audio system digital onlyBack connections Connection exampleSide connections Connecting an Hdmi or a DVI deviceConnecting an amplifier equipped with an Mpeg decoder Connecting a computer Connecting an Hdmi deviceConnecting a DVI device One Hdmi cable type a connectorUsing the PC setting PC of the Auto AdjustSignal names for mini D-sub 15 pin connector Press and press to select Auto adjustTroubleshooting Symptom and solutionSymptom and solution digital only Reference sectionAppendix Australian Parental Guidance Codes NormativeSpecifications Broadcast systemBroadcast transmission systems of each country or region Integrated Digital LCD TVOperating condition Page Page