Toshiba 32SLV411U, 24SLV411U, 19SLV411U manual Using the PC settings feature, Setting the PC Audio

Chapter 6: Using the TV’s features

Using the panel lock feature

You can lock the control panel to prevent your

settings from being changed accidentally (by children, for example). When the Panel Lock is On, none of the controls on the TV control panel will operate except POWER.

To lock the control panel:

1無 Press and highlight the Locks menu icon.

2無 Press  to display the PIN code entering screen. 3無 Enter your four-digit PIN code and press .

4無 Press  to highlight Panel Lock.

5無 Press  to select On. When the control panel is locked and any button on the control panel (except POWER) is pressed, the message “NOT AVAILABLE” appears.

To unlock the control panel:

Select Off in step 5 above, or press and hold the VOLUME – button on the TV control panel for about 10 seconds until the volume icon appears.

Using the PC settings feature

You can view an image from a PC on the TV screen. When a PC is connected to the TV's PC IN terminal, you can use the PC Settings feature to make

adjustments to the image. If the edges of the picture are cut off, readjust the Horizontal Position and Vertical Position. If the picture is affected by interference, readjust the Clock Phase and Sampling Clock.

To adjust the PC settings:

1無 Repeatedly press INPUT to select PC input mode (
“Selecting the video input source to view” page 30).
2無 Press	and open the Setup menu.
3無 Highlight PC Settings and press		.

Note: If a PC is not connected or there is no pc input signal, this feature will be grayed out in the Setup menu.

4無 Press or  to highlight the item you want to adjust. 5無 Press  or  to make the appropriate adjustments.

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

Mode	Description
Horizontal	Moves the picture left/right. The adjustment
Position	range is within ±10 from center.*
Vertical	Moves the picture up/down. The adjustment
Position	range is within ±10 from center.*
Clock	Helps to reduce noise and sharpen the
	picture. The adjustment range is within
Phase
	±16 from center.*
Sampling	Helps to reduce noise and minimize
	periodic vertical stripes on the screen.
Clock	The adjustment range is within ±10
	from center.*
Reset	Highlight this item then press	to get
	an optimum adjustment automatically.

** The default settings may vary depending on the input signal format.

Setting the PC Audio

This function allows you to output or mute the sound from your PC when connecting using the PC IN terminal and an analog RGB cable. ( page 20)

To set the PC Audio:

1無 Press and open the Sound menu.

2無 Highlight Audio Setup and press .

3無 Press  or  to select PC Audio and then press

or  to select No or Yes.

Yes: When viewing the PC input, the audio from the PC Audio input can be heard.

No: When viewing the PC input, there will be no audio.

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No” the HDMI 1 Audio setting changes to “Auto” If PC Audio is set to “Yes” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 3 on page 13 and “Setting the HDMI® audio mode” on page 28.)

45