Sony MDS-E12 operating instructions Press MENU/NO twice, Other Functions

Page 53

Notification of the track end and the disc end (End Of Track/Disc)

This function gives an indication by a flashing message in the display when there is very little remaining time to the end of track durring playback, or to the end of disc during recording.

Notification of the track end being

Playback-End Of track

Notification of the disc end being

Recorded-End Of Disc

The time for this indication can be set both for the remaining playback time of a track (factory setting of six seconds), or for the remaining time on a disc during recording (factory setting of three minutes).

1Press MENU/NO twice.

“Setup menu” appears in the display.

2Turn AMS (or press ./> repeatedly) until “End Of Tr/Disc” appears in the display; press AMS or YES.

3Turn AMS (or press ./> repeatedly) to “On” for notification, “Off” for no notification; press AMS or YES.

4Press MENU/NO.

zTo select the time for notification of the end of track 1 Press MENU/NO twice.

“Setup menu” appears in the display.

2 Turn AMS (or press ./> repeatedly) until “EOT(Play)” appears in the display; press AMS or YES.

3 Turn AMS (or press ./> repeatedly) to select the desired time from 6 to 20 seconds; press AMS or YES.

4 Press MENU/NO.

zTo select the time of notification to end of disc during recording

1Press MENU/NO twice.

“Setup menu” appears in the display.

2Turn AMS (or press ./> repeatedly) until “EOD (Rec)” appears in the display; press AMS or YES.

3Turn AMS (or press ./> repeatedly) to select the desired time from three to ten minutes; press AMS or YES.

4Press MENU/NO.

Other Functions

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents MDS-E12 Owner’s Record For customers in the EuropeFor customers in Canada About This Manual PrecautionsHandling MDs Table of Contents Location and Function of Parts Front Panel Descriptions Rear of the Recorder Remote Descriptions » Scroll button ¥ M.SCAN button@¼ Clear button @Á x stop buttonDisplay Window Discriptions While the recorder is stopped Using the Display WindowWhen you insert an MD While the recorder is playing While the recorder is recordingE a M 2 Tr 1 m 2 5 s Inserting batteries into the remote Getting Started After UnpackingGetting Started XWhen connecting with analog componentsHooking Up the Audio Components Cold Getting Started Position of selector Output level0 0 7 1 2 1 9 0 Setting the ClockDa t e T i m e Y Y M M D D Da t e T i m e D D Y Y Y YRecording on an MD Recording on MDsWhen Protected is displayed When you pause recordingWhen Din Unlock flashes When TOC indicator flashesDo steps 1 to 5 of Recording on an MD on Press MENU/NO twice Recording for long timesP u t L e v e l A x 5 d B Adjusting the Recording LevelErasing blank portions automatically Smart Space/Auto Cut Monitoring the input signal InputRecording Tips Marking track numbers automatically Automatic Track Marking Marking Track Numbers While Recording Track MarkingMarking track numbers manually Manual Track Marking To stop Time Machine Recording Do steps 1 to 7 of Recording on an MD onTo stop Music Synchro-recording Do steps 1 to 6 of Recording on an MD on Press Music SyncPress CD-SYNC Start If the CD player doesn’t start playingPress To change Change Recorder to CD player to CD-SYNCHRO StartOperations you may want to do during play Press or turn Playing MDsPlaying MDs Locating a track with AMS Playing a Specific TrackPlaying a track by entering the track Number Z To go to Do the followingLocating a Particular Point in a Track X t N o N a m e 6 Tr 3 m 2 8 sReserving the next track during play Next Track Play Locating a point while monitoring Sound SearchPlaying Tracks Repeatedly Repeat Play When the play mode is Recorder repeatsRepeating the current track Repeat 1 Play Z Repeating all the tracks on the MD Repeat All Play ZContinue playing the track or use M to locate Playing Tracks in Random Order Shuffle Play ZTo stop Repeat A-B Play Press HCreating Your Own Program Program Play 1 0 0 / 3 S 1 2 m 2 7 sProgramming the tracks Checking the order of tracks Program1 - 0 Tr 0 m 0 0 s Multi-access Play1 - 6 Tr 3 m 2 8 s Storing the Located Track toChecking the program M o r i z i n g M.ACCESSMulti-access play Z Returning to the Specified Point Locate Play Tr 0 m 0 0 s 0 0 fTo mark the desired point Mark Press AMS or YES Press MENU/NOFine adjusting the marked point Rehearsal Pausing After Each Track Auto PauseH e a r s a l 4 3 s 0 4 fAuto Pause and Auto Cue Making Track Play Start Soon Auto CueChanging Playback Speed Variable Speed Play 5 % D R E a M 2 Tr 4 m 0 9 sBefore you start editing Editing Recorded MDsRAM editing and Disc editing To select RAM editingErasing Tracks Erase Using buttons and control for editing OperationsAbout indication which appears during Editing About indications which appear after EditingErasing a portion of a track A-B Erase Erasing all tracks on an MD ALL EraseErasing consecutive tracks Multitrack Erase Example Erasing portion B2 of the second trackCombining two tracks Combine Combining Tracks CombineCombining consecutive tracks Multi track Combine Example combining the second track and fourth TrackExample Moving the second track after the third track Moving Tracks MoveDividing a track after selecting a track Dividing Tracks DivideDividing a track after selecting Dividing point Example Dividing the second trackI n T r 2 Naming a Track or MD using the controls On the recorderNaming a Track or MD Name To enter a spaceNaming a track or MD using the remote Z Press MENU/NO twice while the recorder is stopped Copying names Name CopyCopying the same name to all tracks Disc. Name All Copy Erasing a track or disc name Name Erase Renaming a track or MD ZErasing all names on the MD Name All Erase To rename a track or disc name, do the followingChanging the level of a whole track Undoing the Last Edit UndoChanging Recorded Level after Recording S.F Edit To force a stop during writing To Use Fade In/Fade OutDuring writing, press x Stop, MENU/NO or Clear Turn AMS until YES appears on the displayFade in and Fade Out Z Other FunctionsFade-in Play and Fade-in Recording Fade-out Play and Fade-out RecordingOther Functions Recording on an MD using a timer Using a TimerPlaying an MD using a timer Control terminal functions Rear Panel Terminal FunctionsRemote Terminal Functions Control terminal CTRL-S Mini-jack typeRelay Recording Cabling for Relay Relay PlaybackParallel Input-Output Sub 9-pin male Using Fader PlayRS-232C Setting the keyboard Operating MD Recorder Using a KeyboardConnecting a keyboard to the MD recorder Selecting keyboard typeUsing the Edit Menu Naming a Track or MD Using the KeyboardShort cut to the naming procedure Operations using the 10-key pad Operations using the US or JP keyboardsOperating the Recorder Through the Keyboard Button or function KeyClearing key assignments Assigning Characters to Keyboard KeysAssigning a character Keyboard Operations English Keyboard Layout Recorder Using a KeyboardKeyboard Operations 10-Keyboard Layout OperatingSystem Limitations Limitations when recording over an existing trackAdditional Information Guide to the Serial Copy Management System Trouble shootingMessage code Cause/Remedy Self-Diagnosis FunctionMessage Meaning Display MessagesSpecifications Rack mounting Exterior dimensionsTo access the Setup Menu Setup Menu TableSetting Menu item Function Parameters FactoryTo access the Edit Menu Last Mode MemoryEdit Menu Table Menu item Sub item Function
Related manuals
Manual 72 pages 13.5 Kb

MDS-E12 specifications

The Sony MDS-E12 is a notable addition to the Minidisc player lineup, reflecting Sony's commitment to innovation in the digital audio realm. Released in the late 1990s, this device was designed with a focus on high-quality audio playback and recording, making it a preferred choice for audiophiles and professionals alike.

One of the standout features of the MDS-E12 is its playback precision. Utilizing Sony's proprietary ATRAC (Adaptive TRansform Acoustic Coding) technology, the device processes audio with remarkable fidelity. ATRAC allows for efficient compression of audio files while maintaining impressive sound quality, making the MDS-E12 suitable for both casual listeners and serious music enthusiasts who demand clarity and rich soundscapes from their recordings.

In addition to its playback capabilities, the MDS-E12 also offers seamless recording features. Users can record live audio directly onto the Minidisc, capturing concerts, lectures, or personal performances with ease. The device supports both digital and analog input, allowing for versatile recording options from various audio sources. The built-in microphone input ensures that spontaneous recording is always an option.

Another highlight of the MDS-E12 is its user-friendly interface. The device includes a well-designed LCD display that provides essential information such as track numbers, play time, and remaining recording capacity. The intuitive layout of controls ensures that users can navigate easily through menus and settings, enhancing the overall user experience.

Moreover, the MDS-E12 incorporates a range of playback options. Users can enjoy repeat play, shuffle mode, and program play to customize their listening experience. The ability to label tracks enhances organization, allowing users to manage their collections effectively.

The Sony MDS-E12 is also built with durability in mind. Its robust design can withstand the rigors of daily use, catering to both home listeners and those on the go. The compact size of the device makes it portable, which is ideal for users who appreciate the flexibility of enjoying their audio on various occasions.

In terms of connectivity, the MDS-E12 features optical and coaxial digital outputs, as well as a headphone jack, making it straightforward to integrate with other audio equipment. Its performance, combined with comprehensive features and great sound quality, solidifies the Sony MDS-E12's place in the digital audio history, representing an era where Minidisc technology provided a fresh alternative to cassette tapes and CDs.
Top Page Image Contents