Toshiba 42hl167 manual Using the remote control to operate your other devices, Device code setup

Page 27

Chapter 3: Using the remote control

Using the remote control to operate your other devices

Your TV remote control has one dedicated TV mode and three programmable multi-brand modes: CABLE/SAT, DVD, and VCR/PVR. The default device modes and programmable device modes are listed below.

Note: The TV remote control is preprogrammed to operate most Toshiba devices. To operate a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you will need to program the remote control. See “Programming the remote control to operate your other devices” (at right).

MODE SELECT Default device mode control (before programming)

TV

Toshiba TV

CABLE/SAT

Toshiba Satellite receiver

 

 

DVD

Orion DVD

 

 

VCR/PVR

Toshiba VCR

 

 

 

 

MODE SELECT Device mode control after programming

TV

Toshiba TV

 

 

CABLE/SAT

 

 

 

DVD

Multi-brand video/audio devices

 

 

VCR/PVR

 

 

 

Note: Although your new TV’s remote control includes codes for many devices, it may not include codes for some or all of the features on certain devices you wish to control. If you are unable to program the TV’s remote control to operate your device or some of the features on that device, use the device’s remote control or the controls on the device.

Programming the remote control to operate your other devices

Device code setup

1 Find the code for your device brand in the remote control device code table on pages 29–35.

If more than one code is listed, try each one separately until you find one that works.

2 Press the applicable mode select button (CABLE/SAT, DVD, or VCR/PVR), until the mode select button blinks 3 times.

3 While holding down E, press the five-digit device code for your device.

If a valid code is entered, the mode select button will blink twice.

If an invalid code is entered, the mode select button will blink one long blink.

4 Point the remote control at the device and press pto test the code.

If the device responds to the remote control, you have entered the correct code.

If the device does not respond to the remote control, repeat steps 3 and 4 using another code.

Note: After programming the remote control, make sure all necessary keys on the TV remote control (in addition to p) operate your device. If some keys are not operational, repeat the device code setup using another code (if other codes are listed for your device). If, after trying all listed codes, the necessary keys do not operate your device, use the device’s original remote control.

5 To control the TV, press the “TV” mode select button.

Note:

Although the TV remote control includes codes for many devices, it may not include codes for some or all of the features on certain devices you want to control. If you are unable to program the TV remote control to operate your device or some of the features on that device, use the device’s original remote control (or the control buttons on the device).

Every time you change the batteries you will need to reprogram the remote control.

Some newer VCRs respond to either of two codes. These VCRs have a switch labeled “VCR1/VCR2.” If your VCR has this kind of switch and does not respond to the codes for your VCR brand, set the switch to the other position (“VCR1” or “VCR2”) and reprogram the remote control.

(continued)

27

Image 27
Contents 42HL167 47HL167 52HL167 Dear Customer Safety PrecautionsInstallation Important Safety InstructionsInstallation, Care, and Service Additional Safety PrecautionsCare ServiceRemoving the Pedestal Stand To Display your LCD TV using a Wall BracketChoosing a location for your LCD TV To Display your LCD TV on the included Pedestal StandPart Important notes about your LCD TVTrademark Information Contents Troubleshooting Features of your new TV IntroductionWelcome to Toshiba Introduction TV front and side panel controls and connections Green and Yellow LEDsHD1, ColorStream HD2, Hdmi 1, Hdmi 2, Hdmi 3, PC ColorStream HD-1 and ColorStream HD-2 TV back panel connectionsConnecting your TV Overview of cable typesAbout the connection illustrations To view the VCR Connecting a VCR and antenna or Cable TV no Cable boxTo view the antenna or Cable signal You will needStandard audio cables Connecting a VCR with S-video and a cable boxTo view basic and premium Cable channels Coaxial cables Video cableTo record a TV program while watching a DVD To view antenna or Cable channelsTo view the DVD player To view the VCR or view and record antenna channelsTo connect the IR blaster cable To control the devicesIf you cannot locate the device’s infrared sensor Connecting a camcorder To view the camcorder videoSelect the Video 2 video input source on the TV To connect a DVI device, you will need Connecting an Hdmi or DVI device to the Hdmi inputTo connect an Hdmi device, you will need To view the Hdmi device videoCE-Link connection Before controlling the devicesThree Hdmi cables To control the audio Connecting an audio systemConnecting a personal computer PC To connect a PC to the PC in terminal on the TVTo connect a PC to the Hdmi terminal on the TV To install the remote control batteries Using the remote controlInstalling the remote control batteries Remote control effective rangeTheaterWide 1/2/3, Full, 43 HD, and Native Learning about the remote controlRemote Control functional key chart Combo ReceiverSatellite DVD CH RTN Mode Select Device mode control after programming Using the remote control to operate your other devicesDevice code setup Mode Select Default device mode control before programmingTo reset the remote control Using the volume lock featureOperational feature reset To unlock the remote control’s volume keysTVs Cable boxesSatellite receivers 3D LAB DVDsVCRs DVD/VCR ComboKEC STS Audio Amp PVRsCable/PVR Combo DBS/PVR ComboSAE Audio Amp/TunersMenu layout and navigation Main menu layoutIcon Option Thinc menu Setup/Installation menu layoutSetup menu InstallationVideo Navigating the menu systemTo select the menu language Setting up your TVTo configure the ANT input source Selecting the menu languageTo add or delete channels in the channel memory Programming channels automaticallyManually adding and deleting channels in the channel memory To program channels automaticallySetting the Auto Input feature To assign channel labels To reset Auto InputLabeling channels To turn off the Auto InputTo delete the custom label Setting the Hdmi audio modeTo set the Hdmi audio mode To remove channel labelsViewing the digital signal meter Reset Factory DefaultsViewing the system status Highlight No and press T Selecting the Power-On ModeTo cancel the reset To set the Power-On Mode featurePress CABLE/SAT, DVD, or VCR/PVR Using the TV’s featuresLabeling the video input sources To label the video input sourcesTuning channels Tuning channels using Channel BrowserFavorites Browser Adding and clearing channels and inputs in the History List Elements of the Channel BrowserTuning to a specific channel programmed or unprogrammed Switching between two channels using Channel ReturnSwitching between two channels using SurfLock TheaterWide 2 picture size for letter box programs Selecting the picture sizeNatural picture size TheaterWide 1 picture size for 43 format programsFull picture size for 169 480i, 480p source programs only To set the scroll settingsUsing the Freeze feature Adjusting the picture Selecting the picture modeAdjusting the picture quality To view captions or text Using the closed caption modeDigital CC Settings Base closed captionsCC Selector Adjusting the audioUsing the Closed Caption button on the remote control Using the digital audio selectorMTS field, select Stereo Press C or c to adjust the levelSelecting stereo/SAP broadcasts To listen to stereo soundUsing the Dolby Digital Dynamic Range Control feature Using the StableSound featureChanging your PIN code Using the Locks menuEntering the PIN code If you cannot remember your PIN codeTo download the additional rating system if available Press b to highlight Enable Rating BlockingBlocking TV programs and movies by rating V-Chip To block and unblock TV programs and moviesBlocking channels To block channelsTo unblock individual channels Unlocking programs temporarily Using the input lock featureUsing the control panel lock feature Using the GameTimerTo set the PC Audio Using the PC settings featureSetting the PC Audio To adjust the PC settingsSetting the sleep timer Using CE-LinkCE-Link playback device HD DVD player, etc. control Volume and Mute controls of Audio Receiver To set the CE-Link SetupOther CE-Link functions To display TV status information using Info Understanding the auto power off featureUnderstanding the last mode memory feature To display TV status information using RecallUsing the static gamma feature Using the TV’s advanced featuresUsing the advanced picture settings features Using dynamic contrastTo change the CableClear settings Selecting the color temperatureUsing CableClear digital noise reduction To select the color temperatureUsing Mpeg noise reduction Using the ColorMaster featureUsing Color Palette Adjustment To turn off Game Mode Using the Game Mode featureTo reset ColorMaster to its factory settings To turn on Game ModeHighlight Advanced Audio Settings and press T Using the advanced audio settings featuresUsing the SRS WOW surround sound feature To adjust the WOW settingsGeneral troubleshooting TroubleshootingNo CE-Link operation Channel tuning problemsClosed caption problems Rating blocking V-Chip problemsLED indications LED Indication Condition SolutionSpecifications Format Resolution Frequency Pixel Clock FrequencyAppendix For LCD Televisions 26 and Larger Limited United States WarrantyFor Toshiba Brand Flat Panel Televisions Limited Canadian WarrantyDisclaimer and Limitation of Remedy Appendix Freeze IndexPage 07-05
Related manuals
Manual 82 pages 11.23 Kb Manual 82 pages 16.07 Kb