Setting the HDMI1 audio mode

Connecting your TV

Selecting the PC/HDMI audio mode

You can select PC audio or HDMI audio when using this function (- page 26).

1 Press M, then press Y or y to display the SET UP menu.

SET UP
Language		English
Auto tuning		OK

Manual tuning		OK
AV connection		OK
Picture position		OK

MENU Back EXIT Watch TV

2 Press < or > to select AV connection, then press Q to display the AV connection menu.

AV connection

PC/HDMI1 audio	PC

HDMI1 audio	Digital

Woofer	External

Audio output	Fixed

MENU Back EXIT Watch TV

3 Press < or > to select PC/HDMI1 audio, then press Y or y to select PC or HDMI1.

You can select sound of an HDMI or DVI device connected to the HDMI input terminals (- page 26) from three modes: Auto, Digital or Analog.

Note:

This function is available only when the PC/HDMI1 audio mode is set to HDMI1.

1 From the AV connection menu, press < or > to select

HDMI1 audio.

AV connection

PC/HDMI1 audio		HDMI1

HDMI1 audio		Auto

Woofer		External

Audio output		Fixed

MENU Back EXIT Watch TV

2 Press Y or y to select Auto, Digital or Analog.

Connecting a computer

An analog RGB (15 pin) computer cable can be connected.

TV back view

Mini D-sub 15 pin

Computer

RGB PC cable

Conversion adapter (if necessary)

Audio cable for PC-to-TV connection

Connect a PC cable from the computer to the o RGB/PC terminal on the back of the TV.

The following signals can be displayed:

•VGA: VESA 640 5 480 @ 60/75 Hz

•SVGA: VESA 800 5 600 @ 60/75 Hz

•XGA: VESA 1024 5 768 @ 60/70/75 Hz

•W-XGA: VESA 1280 5 768 @ 60/75 Hz

•S-XGA: VESA 1280 5 1024 @ 60/75 Hz

However, these signal formats are converted to match the number of pixels of the LCD panel.

Therefore, the TV may not display small text properly.

Notes:

•Some PC models cannot be connected to this TV.

•If connecting a certain PC model that signal is particular, the PC signal may not be detected correctly.

•There is no need to use an adapter for computers with DOS/ V compatible mini D-sub 15 pin terminal.

•A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be obscured depending on some signals. This is not the malfunction.

•If the edges of the picture are stretched, readjust the picture position adjustments in the PC Setting menu.

•Depending on the specification of the PC you are playing the DVD-Video on, and the DVD’s title, some scenes may be skipped, or you may not be able to pause during multi-angle scenes.