Toshiba 62HMX85, 52HMX85, 46HMX85 Connecting an HDMIª or a DVI device to the Hdmi inputs

Page 15

Connecting an HDMIª or a DVI device to the HDMI inputs

The HDMI[1] inputs on your TV receive digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI[2] device.

These inputs are designed to accept HDCP[3] program material in digital form from EIA/CEA-861/861BÐ compliant[4] consumer electronic devices (such as a set- top box or DVD player with HDMI or DVI output).

[1]HDMI = High-Definition Multimedia Interface.

[2]DVI = Digital Video Interface.

[3]HDCP = High-bandwidth Digital Content Protection.

[4]EIA/CEA-861/861B compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

The HDMI inputs are designed for best performance with 1080i high-definition video signals, but will also accept and display 480i, 480p, and 720p signals.

NOTE: NEVER CONNECT THIS TV TO A

PERSONAL COMPUTER (PC). THIS TV IS NOT

INTENDED FOR USE WITH A PC.

To connect an HDMI device, you will need:

¥ one HDMI cable (type A connector)

For proper operation, it is recommended that you use a short HDMI cable. You should not encounter difficulty if you use an HDMI cable that is shorter than 16.4 ft (5m).

HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration below). Some CDVs (Video CDs) may not output digital audio signals. In that case, you may hear sound by connecting analog audio cables. However, if you connect analog audio cables with this connection, the HDMI terminal on the TV will not receive the HDMI digital audio signal and you will hear analog audio only.

HDMI device

VIDEO AUDIO

L R

IN

HDMI OUT

OUT

To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

¥When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device.

¥When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV.

To connect a DVI device, you will need:

¥one HDMIÐtoÐDVI adapter cable (HDMI type A connector)

For proper operation, the length of the HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

¥ one pair of standard analog audio cables

An HDMI-to-DVI adapter cable transfers only video. Separate analog audio cables are required (see illustration below).

DVI device

VIDEO

AUDIO

DVI

 

L

R

OUT

IN

OUT

TV

Introduction

 

Connecting

yourTV

Usingthe

remotecontrol

Settingup

yourTV

UsingtheTVÕs

Features

TV

Appendix

You can connect an HDMI cable or an HDMI-to-DVI adapter cable to either HDMI1 or HDMI2 input on the TV.

See ÒSelecting the video input sourceÓ on page 50.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Note:

Model 46HMX85 is equipped with one HDMI input terminal and one set of AUDIO IN jacks.

15

Index

#01E08-16_46/52/62HMX85

15

5/10/05, 12:39 PM

Black

(E) 46/52/62HMX85

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Index Dlptm Projection TelevisionDear Customer Lamp Unit ReplacementInstallation Important Safety InstructionsCare ServiceImportant notes about your DLPª projection TV Important Safety Information Introduction Introduction Welcome to ToshibaExploring your new TV Connecting your TV Connecting an antenna or cable TVConnecting your TV Connecting a cable converter box Connecting a VCRIf you have a VCR with S-video, use an Connecting a cable converter box and VCRSatellite Dish Connecting a DVD player or satellite receiver and a VCRFrom Antenna Stereo VCR From DTV Antenna Connecting a camcorder Connecting two VCRsConnecting an HDMIª or a DVI device to the Hdmi inputs ¥ one Hdmi cable type a connector¥ one pair of standard analog audio cables Amplifier Connecting an audio systemUsing the remote control Preparing the remote control for useInstalling the remote control batteries Remote Control functional key chart Using the remote controlCBL/SAT Audio VCR TV/VCR TV/SAT Searching and sampling the code of a device Device code setupIntroduction Connecting YourTVUsingthe Remotecontrol Setting up your TV Using Appendix IndexDevice code table VCR setup codesCD Player setup codes Learning about the remote control Learning about the menu system Setting up your TVIntroduction Connecting your TV Turning on the TVSelecting the antenna input Changing the on-screen display languageTo program channels automatically Introduction Connecting YourTVAdding channels to the TVÕs memory Programming channels automaticallyEnter Changing channelsSelecting the Quick Restart Adding and erasing channels manuallySettingup yourTV Using the TVÕs featuresAdjusting the channel settings Introduction Connecting YourTV Usingthe ControlFavorite CH Press Enter to displayFavorite CH menu Press Enter to erase the channel label Labeling channelsPress z or y to highlight ClearNatural picture size Selecting the picture size¥ None of the picture is hidden Usingthe RemotecontrolSetting your UsingtheTVÕs Features¥ To lower the picture, press z Press Enter to display the Scroll Adjustment modeScrolling the TheaterWide¨ picture TheaterWide 2 and 3 only ¥ To raise the picture, press yPress y or z to highlight Auto ASPECT, and then press Using the Auto Aspect featureUsingthe Remotecontrol Settingup YourTV UsingtheTVÕs Features Appendix IndexWill display in purple Using the POP double-window featurePress Split to display the POP window Window Video 1, Video 2, Video 3, ColorStream HD1Switching the speaker sound main or POP program Swapping the main and POP picturesUp TV Double-Window aspect ratio Using the programmed channel search functionAutomatic favorite channel search feature Using the favorite channel search functionIf you cannot remember your PIN code Using the Locks menuUsing the V-CHIP menu Entering the PIN codeTV Rating Independent rating system for broadcasters Enable BlockingMpaa Rating Mpaa Rating Independent rating system for moviesRepeat steps 2 and 3 for other channels UsingtheTVÕs Features AppendixLocking channels Unlocking programs temporarilyPress y or z to highlight Clear ALL, and then press Enter NEW PIN Code Locking the video inputsChanging the PIN code OFFAdjusting the picture Selecting the picture modeAdjusting the picture quality Setting YourTV UsingtheTVÕs Features Selecting the color temperatureIntroduction Connecting YourTV Usingthe Remotecontrol Using the CableClear¨ DNR featureResetting your picture setting adjustments ResetSaving your new preferences Film Selecting the lamp modeSelecting the cinema mode Cinema ModeTo the previous menu, press y or z to highlight Custom Press Enter to display the Video Label menuPress y or z to highlight the video source you want to Word Òvcró instead of Òvideo 1.Ó¥ To view text, highlight T1, T2, T3, or T4 Using the closed caption featureClosed caption feature has two options Press y or z to highlight Caption or TEXT, Then press EnterSetting the sleep timer Setting the on timerUsing the TVÕs Appendix Index Connecting YourTV Usingthe Remotecontrol→ Normal → 1/2 Mute → Mute Adjusting the soundMuting the sound Selecting stereo/SAP broadcastsPress y or z to select the item, then press Enter Using the WOWª surround sound featureAdjusting the sound quality Audio Settings menu appearsTo turn off the Dolby Virtual surround sound feature Enjoying the Dolby Virtual surround sound featureHighlight OFF in above Resetting your audio adjustmentsUsing the StableSound¨ feature To turn off the StableSound feature Select OFF in abovePress y or z to select Main or POP, and then press Enter Turning off the built-in speakersSelecting the Audio OUT sound To turn on the built-in speakers Select on in aboveDisplaying TV status information on-screen Understanding the auto power off featureUnderstanding the last mode memory feature Selecting the background of the menu displayWhen to replace the lamp unit Appendix Lamp unit replacement User-replaceable componentUsing the remote control Setting up your TV Features How to replace the lamp unitCleaning the lamp unit glass Replace the thumb screw and hand-tighten Lamp unit disposal LED indicationsVIDEO/AUDIO Input SpecificationsTroubleshooting Help to reduce the effect of this phenomenon FeatureThem of this issue An attached gaming system, and video processing/differentLimited Canada Warranty Audio OUT sound, selecting Index#01E70-7146/52/62HMX85 10/05, 1240 PM Black 46/52/62HMX85 Manufactured by

62HMX85, 52HMX85, 46HMX85 specifications

The Toshiba 46HMX85, 62HMX85, and 52HMX85 are a trio of high-definition LCD televisions that have garnered attention for their impressive features and advanced technologies. Designed to enhance the viewing experience, these models incorporate cutting-edge components that cater to the needs of modern consumers.

The 46HMX85 boasts a 46-inch display, while the 62HMX85 features a larger 62-inch screen, and the 52HMX85 sits comfortably in the middle with its 52-inch display. All three models deliver a full HD resolution of 1920 x 1080 pixels, ensuring crisp and clear images with vibrant colors. This high level of resolution is particularly beneficial for watching movies, sports, and gaming, as it allows for a more immersive viewing experience.

One of the standout technologies in these models is Toshiba's proprietary AMR (Active Motion Rate) system, which enhances motion clarity and reduces blurriness during fast-paced scenes. This is especially useful for action movies and live sports broadcasts, where quick movements can often lead to a loss of detail. Additionally, the televisions come equipped with Dynamic Picture Mode, which optimizes brightness and contrast levels based on the ambient light in the room, delivering an ideal viewing experience no matter the time of day.

Connectivity options are abundant with the Toshiba HMX85 series. Each model features multiple HDMI ports, allowing users to connect a variety of devices, such as gaming consoles, Blu-ray players, and sound systems. USB ports are also available for easy access to multimedia files stored on external drives, enabling users to play music, view photos, and watch videos directly on the television.

Another notable characteristic is the built-in 10W speakers that provide decent audio quality, although audiophiles may wish to connect an external sound system for a richer audio experience. The televisions also support various sound enhancement technologies, ensuring that dialogue remains clear and sound immersion is enhanced.

In summary, the Toshiba 46HMX85, 62HMX85, and 52HMX85 are sophisticated LCD televisions that cater to a wide range of entertainment needs. With their full HD resolution, advanced motion clarity technologies, extensive connectivity options, and reliable audio performance, these models are appealing choices for anyone looking to enhance their home entertainment setup. Whether for casual viewing or serious movie nights, Toshiba has designed the HMX85 series with quality and versatility in mind.
Top Page Image Contents