Adding channels to the TV’s memory
Your TV will stop on specific channels that are stored in the TV’s channel memory when you press Channel + or
Programming channels automatically
Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase channels manually.
Safeguards | Important |
Welcome
To add channels automatically:
1.Press MENU, then press or
2.Press or until the TV/ CABLE selection is highlighted.
3.Press or to highlight either TV or CABLE, depending on which you use.
to display the SETUP menu.
| CH |
PICTURE AUDIO | SETUP OPTION |
TV / CABLE | TV CABLE |
CH PROGRAM | START |
ADD / ERASE | ADD |
Channel Numbers
to Toshiba
If you use an antenna, choose TV. |
|
|
If you use cable, choose CABLE. | SELECT | ADJUST |
4.Press to select CH PROGRAM.
5.Press or to start channel programming. The TV will automati- cally cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory.
While the TV is cycling through the channels, the message “PROGRAMMING
6.When channel programming is complete, the message “COMPLETED” appears.
7.Press CH + or – to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or erase specific channels manually.
To add or erase channels manually:
1.Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the Channel Number buttons.
Channel +/–
Exit
Menu
Connecting your TV
Using the Remote Control
Setting your
2.Press MENU, then press or to display the SETUP menu.
3.Press or to highlight ADD/
ERASE.
4.Press or to select ADD or ERASE, whichever function you want to perform.
5.Repeat steps
| CH |
PICTURE AUDIO | SETUP OPTION |
TV / CABLE | CABLE |
CH PROGRAM | START |
ADD / ERASE | ADD ERASE |
SELECT | ADJUST |
up TV
Using
Changing channels
To change to the next programmed channel:
Press Channel ▲ or ▼ on the TV or CH + or – on the remote control.
To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons
For example, to select channel 125, press 100, 2, 5.
13
the TV’s Features
Appendix