Toshiba L43, W43 USB HDD Record Function, Setting up the USB HDD for Recording, To stop recording

Page 46

CONTROLS AND FEATURES

English

USB HDD Record Function

This function can be used to record and play digital broadcast programmes (function is dependant on country selection). Read the precautions below before recording or viewing programmes using the USB HDD record function.

NOTE:

•In order to use this function, a USB HDD needs to be connected to the TV. Do not use USB Hub.

•After recording operation, time may take to a recording start.

•Recorded programmes saved on the USB HDD can only be viewed on this TV. They cannot be viewed when connected to another TV (including the same model of TV), a PC, or other device.

•You cannot watch one channel while recording another.

•If the recording time to the USB HDD is too short, no data may be saved.

•You cannot record video input signals on the USB HDD.

•Not all types of broadcast may be recordable.

•After programming the TV to record digital broadcasting, do not disconnect the power plug before recording starts. Doing so may cause scheduled recordings to fail even when the power switch is set to “ON”.

•Should video or audio recording fail due to malfunction of the TV or poor reception, no compensation shall be paid.

•If there is a power failure or the power plug is disconnected during programmed recording, recording will stop and will not resume when the power returns or the plug is reconnected.

•Do not disconnect the power plug when the indicator LED is lit.

•Any changes implemented by the broadcasting station may affect programme scheduling.

•Scheduling of multiple consecutive programmes may result in the beginning of each programme not being recorded.

•Accurate start / finish time for recording is reliant on broadcasters maintaining correct time stamp if this not the case the recording will fail.

•Some broadcasters can control whether a program can be recorded or how long you may be able to view it for after recording. The on screen message “Retention limit expired” means that the time limit for viewing the program has lapsed.

•Programmed recording cannot take place if the power plug is not connected.

•Disconnecting the power plug during recording may result in failure to save the recorded programme.

•USB HDD recording feature is not available in all countries.

•When the USB HDD is formatted, all the data stored on the HDD will be erased.

Setting up the USB HDD for

recording

To connect a USB HDD (not supplied):

USB1 or USB2 on the TV

USB cable

USB HDD

(not supplied)

When you connect a USB HDD to the USB port on the TV, a prompt will appear.

a Press C / c to select No and press OK.

NOTE: Not guaranteed to work with all USB HDD.

To record DTV programmes

(One Touch Recording)

To record the programme currently being viewed.

a Press the zREC button on the remote control. The currently viewed programme will start to be recorded.

To stop recording:

a Press the v (stop) button.

A confirmation window “Do you want to stop Recording?” will appear.

b Press C / c to select Yes and press OK. Recording will stop.

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents L43** Digital Series W43** Digital Series Contents Using Broadcast Guide Genre selection/searching Programme Timers digital onlyAutomatic Power Down No Signal Power Down System Information Reset TVHeat Damage Safety PrecautionsAir Circulation Do notWhen using a Wall Bracket Installation and important informationWhere to install When using MHL Mobile High-definition LinkWhen Using a USB Hard Drive HDD Please take noteRemote control Inserting batteries and effective rangeConnecting external equipment Satellite dish Aerial Cable DecoderTo connect an Hdmi device Connecting an Hdmi deviceHDMI’s ARC Audio Return Channel Feature Hdmi cable AV amplifier that supports ARCConnecting an Hdmi CEC Control compatible device Before controlling the devicesTo connect a PC to the RGB/PC Terminal Connecting a computerTo connect a PC to the Hdmi Terminal To connect the TV to the PC with Intel Wireless Display Connecting a home networkTo connect the TV to a home network Wired Please refer to Wireless Setup section onVolume→Channel→Input→Volume Switching onUsing the TV controls Connections Controls and input connectionsPress B / b Press B / b and OK or c Using the menu systemPress B / b and OK or c Quick Setup Startup ApplicationConfiguration or PIN Personal Identification There are 3 methods for Wireless SetupTo cancel searching for the AP Shared Key, WPA-PSK or WPA2-PSK. PressAdvanced Network Setup screen will appear To cancel the Network Connection TestSwitch Type None LNB PowerTransponder 120 10729 MHz V R Astra 19.2EUser Slot Number Ant/Cable/Satellite if available To add a satellite Satellite SettingsTo edit the satellite settings To delete a satelliteTo select the LNB Settings Auto TuningTo edit the Transponder Settings To delete a transponderATV Manual Tuning TuningSkip Select ATV Manual Tuning from the Channel Tuning menuPress Back and repeat from or press Select DTV Manual Tuning from the Channel DTV Manual TuningManual Tuning Tuning menu and press OKManual Tuning for DVB-S DTV SettingsManual Tuning for DVB-C Select DTV Settings from the Installation menu and press OKAnalogue switch-off Standby Channel UpdateLocation setting Channels SatelliteSelecting channels General controlsQuick Menu Time Display analogue onlySound controls TV Speakers On/Off Headphone SettingsAudio Level Offset Audio DescriptionWidescreen viewing Super LiveNative PC Normal PC Wide Wide PC NormalPicture controls Picture ModeReset Picture preferencesAuto Brightness Sensor Base Colour AdjustmentColour Temperature Active Backlight ControlCinema Mode Expert Picture SettingsResolution + Resetting the advanced picture SettingsWhite Balance-Window Display White Balance-Setting TypeTo return to factory setting White Balance-2P White BalancePicture Position Automatic Format WidescreenStretch Picture stillWhen using the TV under wireless LAN environment Wireless LAN InformationWireless LAN and your Health Europe StatementEasy Setup using PBC Push Button Configuration Setting up the NetworkWireless Setup Easy Setup WPSManual Setup Assisted SetupPress B / b Enabled is displayed when using Wireless InformationMAC address of the TVWireless Address Is displayed Disabled is displayed when not usingPress B / b to select IP Address Setup and press OK Advanced Network SetupIP Address Setup Auto Setup Highlight Auto Setup and press c and B / b to select OnNetwork Connection Test DNS SetupTo cancel the Network Connection Test MAC AddressUsing the software keyboard Network Device SetupApps Control Profile TV Power On Control Active Standby Media Renderer SetupDevice Name Setup To record DTV programmes One Touch Recording Setting up the USB HDD for RecordingUSB HDD Record Function To connect a USB HDD not suppliedTo search for and record a programme using Genre Search How to set recordings via Programme GuideUsing the Programme Guide to set future recordings Press cand B / bto select Recording and press OKTo programme the timer To schedule a programme using the information screenTo check, edit or delete scheduling Information To view a recorded programmeTo change the title of recorded programme To display the Library screenTo group the recorded programmes USB HDD capacityTo select USB HDD and Partition for Recording Recording SetupTo select the TimeShift Size To set the recording time for One Touch RecordingScheduling priority Using the Cloud TV ServiceUsing Web Browser To perform a USB HDD operation testTo Add Favourites Websites To use the web browserTo browse favourite websites PIP Picture-in-picture functionGetting started Using SkypeBefore using Skype Preparation To create a new accountContacts/People To Sign into SkypeBasic Operation Select I agree create an account and press OKGroup calls Your remote controlVideo or Voice call Incoming call StatusAdd Contact RecentSettings DialerConnecting your PC to your TV the first time Using Hybrid TV Standard if availableUsing Intel Wireless Display If authentication has already taken placeIntel WiDi Device Name Using the Media PlayerMedia Player Specifications Device ListBasic operation Viewing photo files on a media Server or USB device To Search for content if availableTo display the Device Information or Wireless Information To sort files if availableTo set Background Music USB only To set Interval Time and Repeat settingsSingle View USB and Network Player Photo Slide Show USB and Network Player PhotoVideos List USB and Network Player Movie To set the repeat modeViewing movie files on a media Server or USB device During playbackTo register your TV to a DivX account Resume Play USB onlyTo close the Movie Viewer To deregistration your devicePlaying music files on a media Server or USB device To playback DivX Plus HD contentUsing Multi Title and Alternative Timelines Multi Title Music List USB and Network Player MusicBlue Screen Other featuresPanel Lock To display the file status informationOn Timer TimersProgramme Timers digital only NetflixSleep Timer Energy Saving SettingsAutomatic Power Down No Signal Power DownOn-screen Information icons Digital on-screen informationTo display More Information Press b to highlight More Information and press OKGenre selection/searching Using EPG Electronic Programme GuideUsing Broadcast Guide Updating EPGParental Setup Digital settings parental controlParental PIN Setup Parental PIN SetupSelecting favourite channels Digital settings Channel OptionsWhen all favourites have been selected, press Exit Favourite Channel ListSubtitles Digital settings other settingsLocking channels Audio languagesCommon Interface Software Upgrade LicencesNetwork Upgrade Searching for New SoftwareSoftware Licences System Information and ResetReset TV System InformationPC Settings PC SettingsClock Phase Horizontal and Vertical PositionInput selection Press o on the remote controlInput selection and AV connections Labelling video input sourcesDigital Audio Output Audio DelayDelay Adjustment Audio FormatUsing Hdmi CEC Control Using MHL TV function Navigating pages using List Text servicesNavigating pages using Auto Selecting modesControl buttons Fine Tuning may help Questions and AnswersPicture Ntsc Select Colour System from the Options menu Other problems AccountPin No Signal name InformationAcceptable video or PC signals through the Hdmi terminals Frequency StandardMedia File Video codec Audio codec Player FormatFlash Flv Sorenson H.263 MPEG-1/2 Layer3 Yes Video Swf FLV1 Mov MPEG-4 AVC MPEG-1/2 Layer3 Yes MPEG-4 part2Mp4 MPEG-4 AVC MPEG-1/2 Layer3 Yes M4v MPEG-4 part12,14 FLV1 MPEG-4 AVCLicence information Disposal… Specifications and accessories SECAM-D/KToshiba Television Central Europe Sp. z o.o

L43, W43 specifications

The Toshiba W43 and L43 are noteworthy additions to Toshiba's lineup of advanced electronic devices, specifically designed to cater to the evolving needs of consumers in the digital age. These models exemplify Toshiba's commitment to innovation, functionality, and user experience.

The Toshiba W43, a sleek and stylish model, emphasizes portability without compromising on performance. It is lightweight and designed for ease of use, making it an ideal choice for individuals who are always on the go. One of its main features is the high-resolution display, which offers vibrant colors and sharp images, ensuring a great viewing experience whether you’re watching videos, browsing photos, or accessing applications. This device is powered by an efficient processor, which ensures fast performance and seamless multitasking capabilities. The battery life of the W43 is also impressive, allowing users to work or enjoy entertainment for extended periods without needing a recharge.

On the other hand, the Toshiba L43 is tailored for home and office use, combining powerful features with a stylish design. This model is equipped with a larger display, which is perfect for tasks that require more screen real estate, like working with documents or enjoying multimedia content. The L43 also boasts enhanced audio capabilities, ensuring that sound quality matches the impressive visual experience. Additionally, the L43 incorporates advanced connectivity options, allowing users to connect to various devices effortlessly. This model supports multiple ports, including USB-C and HDMI, making it versatile for connecting to external displays or accessories.

Both models incorporate Toshiba’s innovative technologies, such as energy-efficient components that help reduce power consumption while maintaining performance. They also come with robust security features designed to protect user data, making them suitable for both personal and professional use.

In summary, the Toshiba W43 and L43 stand out due to their unique characteristics and features tailored to meet the needs of different user demographics. Whether you are looking for portability with the W43 or a feature-rich home/office solution with the L43, both models promise reliability and efficiency, reinforcing Toshiba's reputation as a leader in technology innovation.
Top Page Image Contents