Toshiba 27AFX55 appendix Adding channels to the TV’s memory, Changing channels

ADJUST

SELECT

Adding channels to the TV’s memory

When you press CH +/- on the remote control or CHANNEL ▼/▲ on the TV front panel, your TV will stop only on the channels stored in the TV’s channel memory. Follow the steps below to program channels into the memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase specific channels manually.

To add channels automatically:

1.Press MENU, then press or to display the SETUP menu.

2.Press ▲ or ▼ until the TV/CABLE selection is highlighted.

3. Press or to highlight either	CH
	PICTURE AUDIO SETUP OPTION
TV or CABLE, depending on

which you use.	TV / CABLE	TV	CABLE
	CH PROGRAM	START
If you use an antenna, choose TV.	ADD / ERASE	ADD
If you use cable, choose CABLE.	SELECT	ADJUST

4.Press ▼ to select CH PROGRAM.

5.Press or to start channel programming. The TV will automati- cally cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory.

While the TV is cycling through the channels, the message “PROGRAMMING NOW-PLEASE WAIT” appears.

6.When channel programming is complete, the message “COMPLETED” appears.

7.Press CH + or – to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1.	Select the channel you want to add or erase.
	If you are adding a channel, you must select the channel using the
	Channel Number buttons.
2.	Press MENU, then press or
					CH
	to display the SETUP menu.		PICTURE	AUDIO	SETUP		OPTION
3.	Press ▲ or ▼ to highlight ADD/
			TV / CABLE			CABLE
	ERASE.
			CH PROGRAM			START
4.	Press	or to select ADD or
			ADD / ERASE			ADD		ERASE

ERASE, whichever function you want to perform.

5.Repeat steps 1–4 for other channels you want to add or erase.

Changing channels

To change to the next programmed channel:

Press CHANNEL ▼/▲ on the TV front panel or CH +/– on the remote control.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0–9 and 100) on the remote control.

For example, to select channel 125, press 100, 2, 5.

17

Channel

Numbers

Channel +/–

Menu

Safeguards

Toshiba

your TV

Remote Control

your TV

Features

Important

Welcome to

Connecting

Using the

Setting up

Using the

TV’s

Appendix

J3N12221A(E)_P07-17 17 4/25/05, 1:26 PM