Toshiba 26HL37 manual Programming the remote control to operate your other devices

Page 21
While holding down E, press the Channel Number buttons to enter the 3-digit code for your device.

267470726HL37_EN.book Page 21 Friday, July 6, 2007 7:44 PM

Chapter 3: Using the remote control

Programming the remote control to operate your other devices

Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To program your TV remote control to operate a non-Toshiba device (or a Toshiba device that it is not preprogrammed to operate), follow the steps below. For details on using the remote control to operate the device, see page 19.

1 In the remote control code table (- page 22), find the code for your device. If more than one code is listed, try each one separately until you find one that works.

2 Set the MODE SELECT Switch to the type of device you are programming the remote control to operate — CABLE/SAT (for a cable converter box or satellite receiver), DVD (for a DVD player or HTIB [home theater in a box]), or VCR (for a VCR or TV/VCR combo).

3

4 To test the code, turn on the device, point the remote control at it, and press p. (Also see notes below.)

5

6

•If the correct code was entered, the device will turn off.

•If the device does not respond, repeat steps 1–4 using another code.

•If the device does not respond to another code, you will need to use the device’s original remote control.

Remember to set the MODE SELECT Switch back to “TV” to control the TV.

For future reference, write down the code(s) you used:

DEVICE CODE

DEVICE CODE

Note:

•In addition to POWER, confirm that all necessary keys on the TV remote control operate your device. If some keys are not operational, repeat the device code setup using another code (if other codes are listed for your device). If, after trying all listed codes, the necessary keys do not operate your device, use the device’s original remote control.

•Every time you change the batteries, you will need to reprogram the remote control.

•Some newer VCRs respond to either of two codes. These VCRs have a switch labeled “VCR1/VCR2.” If your VCR has this kind of switch and does not respond to the codes for your VCR brand, set the switch to the other position (“VCR1” or “VCR2”) and reprogram the remote control.

21

HL37 (E/F) Web 213:276

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 26HL37 LCD Color Television 26HL37Dear Customer Safety PrecautionsInstallation, Care, and Service Important Safety InstructionsAdditional Safety Precautions InstallationCare ServiceImportant notes about your LCD TV Trademark InformationChoosing a location for your LCD TV Contents Features of your new TV IntroductionWelcome to Toshiba TV front and side panel controls and connections TV back panel connections For an explanation of cable types and connections, seeColorStream HD-1 and ColorStream HD-2 Overview of cable types Connecting your TVTo view the antenna or Cable signal Connecting a VCR and antenna or Cable TV no Cable boxYou will need To view the VCRTo view basic and premium Cable channels Connecting a VCR with S-video and a cable boxCoaxial cables Video cable Standard audio cablesTo view the DVD player To view antenna or Cable channelsTo view the VCR or view and record antenna channels To record a TV program while watching a DVDConnecting an audio system Connecting a camcorderTo view the camcorder video To control the audioFormat Resolution Frequency Connecting an Hdmi or DVI device to the Hdmi inputTo connect an Hdmi device, you will need To view the Hdmi device videoConnecting a personal computer PC To connect a PC to the PC in terminal on the TVTo connect a PC to the Hdmi terminal on the TV Preparing the remote control for use Using the remote controlInstalling the remote control batteries Remote control effective rangeTheaterWide 1/2/3, Full, 43 HD, and Native Learning about the remote controlTo use your TV remote control to operate a Using the remote control to operate your other devicesVCR, set the Mode Select Switch to VCR CH BbCable SAT VCR DVD Remote Control functional key chartProgramming the remote control to operate your other devices Satellite receiver Cable converter boxTV/VCR Combo DVD/VCR ComboHtib Menu layout and navigation Menu LayoutIcon Option Navigating the menu system Selecting the menu language Setting up your TVProgramming channels automatically To select the menu languageManually adding and deleting channels in the channel memory Programming your favorite channelsTo add or delete channels in the channel memory To add and delete channels in the Favorite Channel listsLabeling channels Setting the Hdmi audio mode To set the Hdmi audio modeWhen the sound is not audible To select the video input source using the program list Using the TV’s featuresSelecting the video input source to view Labeling the video input sourcesTuning your favorite channels Tuning channelsTuning to a specific channel programmed or unprogrammed Switching between two channels using Channel ReturnTheaterWide 1 picture size Natural picture sizeFull picture size for 43 480i, 480p source programs only TheaterWide 2 picture size for letter box programsUsing the auto aspect ratio feature Adjusting the Picture PositionSignal Automatically selected when Source Auto Aspect is On Selection Pressing C Pressing cSelecting the gray level for 43 mode side panels Using the blue screen functionSelecting the picture mode Adjusting the pictureAdjusting the picture quality Mode Picture QualityUsing the black stretch feature Using Mpeg noise reductionUsing CableClear/DNR digital noise reduction Selecting the color temperature Using the closed caption modeTo select the color temperature To view captions or textClosed Caption Reception Adjustment Adjusting the audioMuting the sound Selecting stereo/SAP broadcastsUsing the SRS WOW surround sound feature Adjusting the audio qualityTo adjust the audio quality To adjust the WOW settingsUsing the StableSound feature Using the Locks menuEntering the PIN code If you cannot remember your PIN codeUsing the Video lock feature Changing your PIN codeLocking channels Setting the PC Audio Using the PC settings featureTo adjust the PC settings To set the PC AudioSetting the On timer Setting the sleep timerUnderstanding the last mode memory feature Understanding the auto power off featureTo display TV setting information on-screen To close the Recall screenGeneral troubleshooting TroubleshootingChannel tuning problems Remote control problemsClosed caption problems Make sure the Hdmi cables with the Hdmi Logo Are usedSpecifications Pin No Signal nameAppendix For Toshiba Brand Flat Panel Televisions Limited Canadian WarrantyDisclaimer and Limitation of Remedy New PIN code Index267470726HL37EN.book Page 51 Friday, July 6, 2007 744 PM 07-08

26HL37 specifications

The Toshiba 26HL37 is an LCD television that encapsulates a blend of modern technology and user-friendly features, making it an appealing choice for those looking for a compact yet capable TV. With its 26-inch screen size, the 26HL37 is designed to fit seamlessly into smaller living spaces, bedrooms, or even kitchens, offering a versatile viewing solution for a variety of environments.

One of the standout features of the Toshiba 26HL37 is its high-resolution display, which provides sharp and vibrant images. The television supports a resolution of 1366 x 768 pixels, ensuring that viewers can enjoy their favorite movies, shows, and games with impressive clarity. Coupled with a dynamic contrast ratio, the television delivers deeper blacks and brighter whites, further enhancing the overall picture quality.

The 26HL37 is equipped with stereo speakers that support Surround Sound technology. This feature helps to create an immersive audio experience, allowing viewers to enjoy richer soundscapes without the need for external speakers. The built-in audio enhancements ensure that dialogue remains clear and music or action scenes come to life with impressive fidelity.

Connectivity is another area where the Toshiba 26HL37 shines. It comes with multiple input options, including HDMI ports, component inputs, and composite inputs, making it easy to connect various devices such as gaming consoles, Blu-ray players, and streaming devices. This versatility allows users to tailor their entertainment setup according to their needs and preferences.

In terms of design, the Toshiba 26HL37 boasts a sleek aesthetic, with a slim profile and minimalistic bezels that keep the focus on the screen. Its lightweight design makes it easy to mount on a wall or place on a stand, providing flexibility in terms of placement.

Energy efficiency is also a priority with the Toshiba 26HL37. The television is designed to consume less power compared to older models, making it an environmentally friendly choice that can also help reduce electricity bills.

In summary, the Toshiba 26HL37 offers a well-rounded package of features, performance, and design. With its high-resolution display, robust audio capabilities, diverse connectivity options, and energy-efficient design, it is a compelling option for anyone in the market for a reliable and stylish television that fits into compact spaces. Whether for casual viewing or as part of a home entertainment setup, the 26HL37 is sure to deliver a satisfying experience.
Top Page Image Contents