Toshiba 27AF42 Changing channels, Image tilt correction, Adding and erasing channels manually

Adding and erasing channels manually

After you have automatically programmed all active channels into the TVÕs memory, you can manually add and erase individual channels.

To add or erase a channel in the TV’s memory:

RECALL MUTE

o

POWER

Setting up your TV

1.Tune the TV to the channel you want to add or erase. If you are adding a channel, you will need to use the CHANNEL NUMBERS to select the channel.

2.Press MENU.

3.Press x or • to highlight the SET UP menu.

4.Press y or z to highlight ADD/ERASE.

SET UP

LANGUAGE:
	[ENGLISH] FRANCAIS ESPANOL
TV/CABLE:		[TV] CABLE
CH PROGRAM
ADD/ERASE:		[ADD] ERASE
MORE
MOVE [	]	SELECT [	]

5.Press x or • to highlight ADD or ERASE, whichever function you want to perform.

6.Press MENU.

7.Repeat steps 1Ð6 for other channels you want to add or erase, or press EXIT to return to normal TV viewing.

Changing channels

To change to the next programmed channel:

Press CHANNEL yz.

To change to a specific channel (programmed or unprogrammed):

Press the CHANNEL NUMBERS (0Ð9 and 100).

Note: For channels 100 and higher, press the 100 button, and then the next two channel numbers (for example, to select channel 100, press 100, 0, 0; to select channel 125, press 100, 2, 5).

Image tilt correction

When you install or change the direction of the TV, the picture may become tilted (caused by the EarthÕs magnetism). If this happens, use the image tilt correction feature to obtain the best possible picture.

To adjust the image tilt:

1.Press MENU, and then press x or • until the SET UP menu appears.

2.Press y or z to highlight IMAGE TILT.

3.Press x or • to adjust the picture tilt (from Ð10 to +10).

SET UP

MORE

DEMO	[START] STOP
IMAGE TILT		+3 –		+
MOVE [	]	SELECT [	]

1 2 3

4 5 6

7 8 9

CH RTN

100 0 ENT

CH

VOL MENU/ VOL

ENTER

CH

TV

CABLE

VCR EXIT

CHANNEL NUMBERS

MENU

yz x •

CHANNEL

yz

EXIT

18