Toshiba 22AV500U Programming channels automatically, To program channels automatically

Page 30

Chapter 5: Setting up your TV

Programming channels into the TV’s channel memory

When you press or on the remote control or TV control panel, your TV will stop only on the channels you programmed into the TV’s channel memory.

Follow the steps below to program channels into the TV’s channel memory.

Programming channels automatically

Your TV can automatically detect all active channels in your area and store them in its memory. After the channels are programmed automatically, you can manually add or erase individual channels in the channel memory.

Note:

•You must configure the ANT/CABLE input source before programming channels (page 29).

•The automatic channel programming process will erases channels that were previously programmed into the TV’s memory.

•To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control.

•Programming channels when the ANT/CABLE input is configured for Cable will take substantially longer than when the antenna input is configured for Antenna. This is normal; however, once channel programming is finished, you should not have to repeat the programming process again unless your Cable TV service lineup changes significantly.

•

To program channels automatically:

1� Configure the antenna input source, if you have not already done so (page 29).

2� Press and open the Setup menu. 3� Highlight Installation and press .

4� (A new set of Installation menu icons will appear, as shown below.) Open the Terrestrial menu, highlight Channel Program to bring up the Start, and press

again to begin channel programming.

The TV will automatically cycle through all the antenna channels, and store all active channels in the channel memory. While the TV is cycling through the channels, the message “Scanning channels, please wait” appears (as shown above).

5� To cancel channel programming, press on the remote control (or highlight Cancel in the on-screen display and

press ).

When channel programming is finished, press or to view the programmed channels.

Manually adding and deleting channels in the channel memory

After automatically programming channels into the channel memory, you can manually add or delete individual channels.

To add or delete channels in the channel memory:

1� From the Setup menu, highlight Installation and press . A new set of Installation menu icons will appear.

2� Open the Terrestrial menu, highlightChannel Add/ Delete, and then press .

To add a channel to the channel memory:

Highlight the unchecked box next to the channel number you want to add, and then press to check the box.

(continued)

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents 22AV500U Tune Into Safety Safety PrecautionsIssue Dear CustomerAdditional Safety Precautions Important Safety InstructionsInstallation, Care, and Service InstallationCare Choosing a location for your LCD TV Part Important notes about your LCD TVTrademark Information Contents Introduction Introduction TV front and side panel controls and connections TV back panel connections Connecting your TV Overview of cable typesAbout the connection illustrations You will need Connecting a VCR and antenna or Cable TV no Cable boxTo view the antenna or Cable signal To view the VCRCoaxial cables Video cable Connecting a VCR with S-video and a cable boxTo view basic and premium Cable channels Standard audio cablesTo view antenna or Cable channels Connecting a camcorder To view the camcorder videoSelect the Video in video input source on the TV To connect an Hdmi device, you will need To view the Hdmi device videoTo connect a DVI device, you will need To control the audio Optical audio output format onTo connect a PC to the PC in terminal on the TV Connecting a personal computer PCSignal To connect a PC to the Hdmi terminal on the TVInstalling the remote control batteries Using the remote controlPreparing the remote control for use Remote control effective rangeLearning about the remote control DVD player or HTIB, set the Mode Select switch to To use your TV remote control to operate aVCR, set the Mode Select switch to AUX AUXRemote Control functional key chart AUX 1 VCRProgramming the remote control to control your other devices TV/VCR Combo Cable converter boxSatellite receiver DVD/VCR ComboHtib Menu layout and navigation Main menu layoutIcon Option Navigating the menu system Setup/Installation menu layoutInput Configuration  Opens the Input Configuration menu Channel Program  Start  Scans for new channels onSelecting the menu language Setting up your TVTo configure the ANT/CABLE input source To select the menu languageTo program channels automatically Programming channels automaticallyManually adding and deleting channels in the channel memory To add or delete channels in the channel memoryLabeling channels To create and assign a custom label Setting the Hdmi audio modeTo set the Hdmi audio mode To delete the custom labelReset Factory Defaults Viewing the digital signal meterSetting the time zone Viewing the system statusTo select the video input source to view Selecting the video input source to viewLabeling the video input sources To label the video input sourcesTuning channels Tuning channels using Channel BrowserFavorites Browser Elements of the ChannelBrowser Adding and clearing channels and inputs in the History ListTuning to a specific channel programmed or unprogrammed Setting the Channel Tuning ModeTuning to the next programmed channel Switching between two channels using Channel ReturnTo select the picture size using the menus Switching between two channels using SurfLockTo select the picture size using the remote control Selecting the picture sizeTheaterWide For letter box programs NaturalTheaterWide For 43 format programs TheaterWide For letter box programs with subtitlesSelecting the cinema mode Adjusting the picture quality Adjusting the pictureSelecting the picture mode To select the picture mode using the menu systemBase closed captions Using the closed caption modeDigital CC Settings CC SelectorMuting the sound Adjusting the audioUsing the digital audio selector Selecting stereo/SAP broadcastsTo adjust the audio quality Adjusting the audio qualityUsing the Dolby Digital Dynamic Range Control feature To select the optical audio output formatIf you cannot remember your PIN code Using the Locks menuEntering the PIN code Changing your PIN codeTo download the additional rating system if available Using the input lock feature Blocking channelsUnlocking programs temporarily Using the GameTimer Using the control panel lock featureUsing the PC settings feature Setting the PC AudioSetting the sleep timer To display TV status information using Recall Understanding the auto power off featureUnderstanding the last mode memory feature To display TV status information using InfoUsing the static gamma feature Using the TV’s advanced featuresUsing dynamic contrast Selecting the color temperatureUsing Mpeg noise reduction Using the Game Mode featureTroubleshooting General troubleshootingRating blocking V-Chip problems Channel tuning problemsClosed caption problems Hdmi problemsAppendix Acceptable signal formats for PC in and Hdmi terminals Format Resolution Frequency Pixel Clock FrequencyLimited United States Warranty For LCD Televisions 23 and smaller Depot Repair WarrantyLimited Canadian Warranty For Toshiba Brand Flat Panel TelevisionsDisclaimer and Limitation of Remedy Appendix Page Toshiba America Consumer PRODUCTS, L.L.C
Related manuals
Manual 60 pages 18.82 Kb

22AV500U specifications

The Toshiba 22AV500U is a compact, versatile television that combines functionality and advanced features, making it an excellent choice for small spaces like bedrooms, kitchens, or as a secondary TV option. With its 22-inch screen size, this model offers a perfect balance of display area without overwhelming surroundings, which is ideal for those who wish to maximize space without sacrificing quality.

One of the standout features of the Toshiba 22AV500U is its HD resolution of 1366 x 768 pixels. This high-definition display delivers clear, vibrant images, ensuring that viewers can enjoy their favorite movies, shows, and sports events with stunning clarity. The LED backlighting technology enhances the screen's brightness and contrast, providing a more dynamic viewing experience even in well-lit rooms. This means that users can enjoy sharper images and richer colors, making media consumption more engaging.

The Toshiba 22AV500U also includes built-in digital tuners, enabling access to over-the-air channels without the need for additional equipment. This feature is particularly appealing in an era where cord-cutting is gaining popularity. With the ability to receive high-definition broadcast signals, users can enjoy their local channels in superior quality.

Connectivity options are abundant with the Toshiba 22AV500U. It features multiple HDMI ports, allowing for easy connection to various devices such as gaming consoles, Blu-ray players, and streaming devices. Additionally, the inclusion of a USB port makes it convenient to view photos and videos directly from a USB drive, adding to the TV’s versatility.

Toshiba has also integrated audio enhancements into the 22AV500U. The television comes equipped with built-in speakers that deliver clear and balanced sound, ensuring that dialogue and soundtracks are easily heard without the need for external speakers. For audiophiles, the TV is compatible with various audio output options for connecting to sound systems or soundbars.

In summary, the Toshiba 22AV500U combines a compact size with impressive features like HD resolution, LED backlighting, extensive connectivity options, and built-in digital tuners. This model stands out as a great option for those seeking an efficient, high-quality television that doesn’t compromise on performance, making it a valuable addition to any home entertainment setup.
Top Page Image Contents