Toshiba ZH36 Series owner manual Manual tune, Programme System Search, Station Name, Manual Tuning

Manual tune

As an alternative to Auto Tuning, the TV can be tuned-in manually using Manual Tuning. For example: if the television cannot be connected to a video/decoder with a Scart lead or to tune-in a station on another System (see page 7).

Use Sand Rto move across the screen and select any of these Manual Tune options.

Programme	System	Search	Programme skip/	Manual fine	Station Name
			Channel	tuning

Programme: The number to be pressed on the remote control.

System: Specific to certain areas. See page 7.

Search: Search up and down for a signal.

Programme skip: * means nothing has been stored or the facility to skip the channel is ON. See page 9. Channel: The channel number on which a station is being broadcast.

Manual fine tuning: Only used if interference/weak signal is experienced. See page 10.

Station Name: Station identification. Use the P or Q and Sor Rbuttons to enter up to seven characters.

To allocate a programme position on the television for a decoder and VCR: turn the decoder on, insert a

pre-recorded tape in the video and press PLAY, then manually tune.

1Press MENU and using S or R select the Set up menu, with Q highlight Manual tuning, press R to select.

Language	Set up	z	English	x
Country		z	GB	x
Auto Tuning				x
Manual Tuning				x
Programme Sorting		z		x
Teletext Mode			List	x
EXIT To Exit	fe Select		z x Adjust

2Use P or Q to highlight the programme position required e.g. we suggest Prog. 0 for a video.

		f		Manual Tuning
			Prog.	Channel	Station
			0	60	VCR
			1	22	BBC1
Different			2	28	BBC2
			3	25	ITV
Channel			4	32	CH4
numbers		e	5	* 69
may	be
displayed		EXIT Watch TV			fe Select
		MENU Previous			z x Change
		OK	Change

3Press OK to select.

4Press R to select System and use P or Q to change (if required, see page 7).

			Manual Tuning
System
z		f				x
	0	I	60	0	VCR
		e
EXIT Watch TV						z xSelect
MENU Previous						fe Adjust
OK	Store

8 Continues on the next page